550.108
Tool Dynamic Preset Tool Balancing Systems
Balancing and presetting are key elements of modern manufacturing. It is obviously a good idea to combine these two procedures. The Tool Dynamic Preset is a perfect combination of Haimer's balancing technology. The tool is clamped in the high precision balancing spindle fitted with Haimer's proven adapter system. This saves time and increases accuracy because the tool does not have to be re-clamped.
Balancing and presetting are key elements of modern manufacturing. It is obviously a good idea to combine these two procedures. The Tool Dynamic Preset is a perfect combination of Haimer's balancing technology. The tool is clamped in the high precision balancing spindle fitted with Haimer's proven adapter system. This saves time and increases accuracy because the tool does not have to be re-clamped.
• Forward-looking state-of-the-art technology by technology leaders
• Highest efficiency by combining two production stages
• Utmost precision due to high precision clamping in Haimer's balancing adapters
• Reasonable price and efficiency ratio
• Needs little space
• Time saving
• Simple and logical operation
• Adapter for all interfaces
• Highest possible measuring comfort
For more information regarding this item (Tool Dynamic Preset Tool Balancing Systems) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
Tool Dynamic TD 800 Special Tool Balancing Systems
Based on the proven foundation provides the tool Dynamic Balancing Tool Dynamic TD 800, the balancing of large rotors of all types includes bearing rings, grinding wheels and turbine wheels. With tailor-made clamping adapters, balancing their rotors used quickly and easily.
Tool Dynamic Automatic Tool Balancing Systems
The new Tool Dynamic TD 2010 Automatic is a truly universal CNC-based balancing machine with automated correction of the unbalance. The Tool Dynamic TD 2010 Automatic automatically compensates the unbalance in one or two planes by drilling, milling or grinding. The machine can work vertically and horizontally. The balancing machine is controlled by an integrated 19" touch-screen. The numerical control is a Siemens based 840DSL, which can be accessed simultaneously with the balancing software.
Tool Dynamic Comfort Tool Balancing Systems
If you want to use the Tool Dynamic frequently and keep the balancing time as short as possible, you should decide on the Comfort machine. It is equipped with a PC, keyboard, mouse and monitor. Tool Dynamic Comfort Plus is equipped with PC, keyboard, mouse and flatscreen.
Power Clamp Preset Network Heat Shrink Systems
The Power Clamp Preset Network is based on the time-tested Power Clamp Preset. It is equipped with a PC that acts as the interface to your tool management and controls the shrink fit operation as well.
Tool Dynamic Economic Tool Balancing Systems
Long tools must be balanced in two planes in order to eliminate the couple unbalance. The handling is done by an integrated keyboard and screen, which is clearly designed. Furthermore the Economic Plus has an integrated drawer for accessories.
Tool Dynamic TD 1002 Tool Balancing Systems
Balancing Machine to balance tool holders on 1 and 2 planes.
- At reasonable price (no PC)
- Table and complementary machine
- Ideal for mould makers
- For small batch lots, single application and standard chucks
- Adapter with automatic clamping system
HSK Tool Holder Taper 30 Degree Clamping Angle Gauges
Using the calibrated master, the distance of the 30 degree clamping slope relative to l 2 is preset using the dial indicator holder. The tool taper to be measured is placed in the centering piece, allowing the variation of the taper to be measured.
HSK-F Shrink Fit Chucks (Standard Length)
For Carbide, Cermet and HSS tool shanks with tolerance h6. Available for HSK-F 63. Other sizes and profiles available on request.
MQL HSK-A Heat Shrink Fit Chucks for Manual Tool Change
- New MQL standard, l2 is plug-in depth at DIN 6535
- For 1-channel systems
- Balancing quality: G 6.3 / 15,000 rpm
- For shank tolerance h6
Submit your feedback