687.KS
KS Clamping Cartridges (Standard)
Available HSK-C 32, 40, 50, 63, 80, 100
PDF Data Sheet: KS Clamping Cartridges (Standard) (687.KS)| HSK Taper | Hex Key Size | Tighten To | Part Number | |||||
|---|---|---|---|---|---|---|---|---|
| HSK-A/C 32 | 3 mm | 6 Nm | 355.611.032.000 | |||||
| HSK-A/C 40 | 3 mm | 7 Nm | 355.611.040.000 | |||||
| HSK-A/C 50 | 4 mm | 15 Nm | 355.611.050.000 | |||||
| HSK-A/C 63 | 5 mm | 20 Nm | 355.611.063.000 | |||||
| HSK-A/C 80 | 6 mm | 30 Nm | 355.611.080.000 | |||||
| HSK-A/C 100 | 8 mm | 50 Nm | 355.611.090.000 |
KS Assembly Spanners
Available for HSK-C 32, 40, 50, 63, 80, 100. Also available MLC-cartridges for HSK-C 40, 50, 63, 80, 100.
Used for mounting on machine spindles and adapters as a manual tool holding device for HSK tools.
NoteIn case of damages to individual parts, the cartridges can be replaced on request in the repair exchange.
For more information regarding this item (KS Clamping Cartridges (Standard)) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
Rear-Clamp Manual Clamping Cartridges
355.621 series manual clamping cartridges are suitable for HSK-E and HSK-F holders that do not have drive key slots or an access hole on the side of the taper. In addition, the center bolt is compatible with standard HSK coolant tubes.
KS Assembly Spanners
Available for HSK-C 32, 40, 50, 63, 80, 100. Also available MLC-cartridges for HSK-C 40, 50, 63, 80, 100.
KS Installation Tools
Available for HSK-C 32, 40, 50, 63, 80, 100
KS Clamping Cartridges for High Pressure
Available HSK-C 32, 40, 50, 63, 80, 100
3D Printing Replacement Cartridges
A true industrial thermoplastic, ABS is widely used throughout industry. When combined with a Dimension Elite system, P430 ABS is ideal for 3D printing of models in the engineering office.
Drawbar Force Gauges
The BERG clamping force measuring system for the tool holders is designed for force measurement when the spindle is stationary! The measuring system consists of a handy sturdy display device in pocket calculator format and the measuring equipment required for the various application. The measured data can be transferred to any WIN 9x/NT PC via a serial standard inter face and represented in y/t. The measuring system includes a practical case for accommodating the display device, the measuring equipment, the charger and the connecting cable.
PSK/PSC/Capto Manual Cartridges
PSK/PSC/Capto Manual Cartridges
Clamping Cartridge Installation Tools
For the installation of 4-point clamping sets, if there are difficulties locking the spindle.
KS Clamping Cartridges for Minimal Lubrication (MLC)
Available for HSK-C 40, 50, 63, 80, 100
Submit your feedback