682.420.0700
Kelch HSK-A Reduction Sleeves for Straight Shanks Slim Version
Available for HSK-A 63
PDF Data Sheet: Kelch HSK-A Reduction Sleeves for Straight Shanks Slim Version (682.420.0700)
UseFor holding shank tools with lateral driving surface, DIN 1835-1 type B and inclined clamping surface (2º), DIN 1835-1 type E or DIN 6535 type HB and HE.
DesignPermissible concentricity deviation of hollow taper shank to location hole d 1= 0.003 mm (measured at 3 x D cantilever length). Chucks are fine balanced according to ISO 1940-1 G 6.3 at 12,000 rpm.
Standard SpecificationClamping screw and adjusting screw included.
NoteFor an increased machining accuracy the bore tolerance is much reduced compared to DIN 1835.
Bored through adjusting screw for coolant. Other designs and sizes are available on request.
For more information regarding this item (Kelch HSK-A Reduction Sleeves for Straight Shanks Slim Version) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
HSK-A Reduction Sleeves for Straight Shanks with Lateral Driving Surface, Conical Version
Available for HSK-A 63, 100
HSK-E i-tec Shrink Fit Chucks Extremely Slim Version
Available for HSK-E 40
HSK-A Reduction Sleeves for Straight Shanks with Lateral Driving Surface (Weldon)
Available for HSK-A 40, 50, 63, 80, 100
HSK-A Reduction Sleeves for Straight Shanks with Inclined Clamping Surface (Whistle Notch)
Available for HSK-A 40, 50, 63, 80, 100
HSK-A Reduction Sleeves for Morse Tapers with Tang
Available for HSK-A 50, 63, 80, 100
HSK-A Reduction Sleeves for Morse Tapers with Thread
Available for HSK-A 50, 63, 80, 100
HSK-A i-tec Shrink Fit Chucks Slim Version
Available for HSK-A 63, 100
HSK-A Drill Chucks
Available for HSK-A 50, 63, 80, 100
HSK-A Collet Chucks for ER/ESX ER-11/16 Collets with Internal Thread
Available for HSK-A 40, 50, 63, 100
Submit your feedback