530.100.663.000

HSK-F63 Spindle Taper Wiper

HSK-F Spindle Taper Wiper

Zoom Enlarge Image

HSK-F Spindle Taper Wiper

Used to clean lubricant and debris from inside the spindle to prevent slipping and poor face contact with the taper. Made with plastic and soft fiber pads for safe contact inside spindles. Recommended cleaning accessory before gauging and performing measurements inside the spindle.

Full Data Sheet (530.100.1)

PDF Data Sheet: HSK Spindle Wipers (530.100.1)

Product Accessory
Part Type Spindle Taper Wiper
Taper / Standard HSK-F
Taper Size 63


Taper Part Number
HSK-A/C/E 25                 530.100.125.000
HSK-A/C/E 32                 530.100.132.000
HSK-A/C/E 40                 530.100.140.000
HSK-A/C/E 50                 530.100.150.000
HSK-A/C/E 63                 530.100.163.000
HSK-A/C 80                 530.100.180.000
HSK-A/C 100                 530.100.190.000
HSK-A 125                 530.100.192.000
HSK-F 63                530.100.663.000

Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (HSK-F63 Spindle Taper Wiper) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias

Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

HSK-F Tool Holder Blanks
HSK-F Tool Holder Blanks

TAC Rockford stocks HSK-F63 blanks. Other sizes are available on request.

Machine Tool Service Kits
Machine Tool Service Kits

Machine tool service kits from TAC Rockford include all common preventive gauges for a specific machine tool taper in one convenient kit.

Kits are customized to a specific machine taper and include drawbar pullforce gauges, runout test arbors, tool changer alignment tool, spindle taper gauge¹ and accessories such as a spindle taper wiper. Contact us for gauges included

Already have some of the gauges? We can customize a kit with only the additional items needed.

Looking for a different combination of gauges? We can customize a kit to fit your specific requirements.

¹Taper gauge included with steep taper only, optional for HSK

HSK Spindle Wipers
HSK Spindle Wipers

Used to clean lubricant and debris from inside the spindle to prevent slipping and poor face contact with the taper. Made with plastic and soft fiber pads for safe contact inside spindles. Recommended cleaning accessory before gauging and performing measurements inside the spindle.

Steep Taper Spindle Wipers
Steep Taper Spindle Wipers

Used to clean lubricant and debris from inside the spindle to prevent slipping and poor face contact with the taper. Made with plastic and soft fiber pads for safe contact inside spindles. Recommended cleaning accessory before gauging and performing measurements inside the spindle.

HSK Tool Holder Taper Wipers
HSK Tool Holder Taper Wipers

Used for cleaning the external taper and face.

HSK to Steep Taper Adapters
HSK to Steep Taper Adapters

Application: for holding steep taper tool holders in an HSK spindle.

Standard-Duty Tool Changer Grippers
Standard-Duty Tool Changer Grippers

Standard duty grippers are injection molded or machined from specially formulated high-strength fiber reinforced plastics. HSK40 and HSK63 grippers are available from stock for quick delivery.

Steep Taper Spindle Gauge Manual
Steep Taper Spindle Gauge Manual

Download PDF for instruction manual.

Dial Indicator Spindle Taper Gauges
Dial Indicator Spindle Taper Gauges

To ensure sustained accuracy at HSK interfaces, we recommend comparison measuring of the geometry of HSK tool shanks and spindles at regular intervals. These checks should become more frequent with an increased change rate at the interface. Calibration on request.

Page loaded in 0.1407 seconds.