530.100.190.000

HSK-A/C 100 Spindle Wipers

HSK-F Spindle Taper Wiper

Zoom Enlarge Image

HSK-F Spindle Taper Wiper

Used to clean lubricant and debris from inside the spindle to prevent slipping and poor face contact with the taper. Made with plastic and soft fiber pads for safe contact inside spindles. Recommended cleaning accessory before gauging and performing measurements inside the spindle.

Full Data Sheet (530.100.1)

PDF Data Sheet: HSK Spindle Wipers (530.100.1)

Product Accessory
Part Type Spindle Taper Wiper
Taper / Standard HSK-A/C
Taper Size 100


Taper Part Number
HSK-A/C/E 25                 530.100.125.000
HSK-A/C/E 32                 530.100.132.000
HSK-A/C/E 40                 530.100.140.000
HSK-A/C/E 50                 530.100.150.000
HSK-A/C/E 63                 530.100.163.000
HSK-A/C 80                 530.100.180.000
HSK-A/C 100                530.100.190.000
HSK-A 125                 530.100.192.000
HSK-F 63                 530.100.663.000

Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (HSK-A/C 100 Spindle Wipers) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias

Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

Steep Taper Spindle Wipers
Steep Taper Spindle Wipers

Used to clean lubricant and debris from inside the spindle to prevent slipping and poor face contact with the taper. Made with plastic and soft fiber pads for safe contact inside spindles. Recommended cleaning accessory before gauging and performing measurements inside the spindle.

KS Adapter Flanges
KS Adapter Flanges

Used for fitting onto machine spindle or in standard SK adapters for holding HSK tools. Available for HSK-C 32, 40, 50, 63, 80, 100

HSK Spindle Wipers
HSK Spindle Wipers

Used to clean lubricant and debris from inside the spindle to prevent slipping and poor face contact with the taper. Made with plastic and soft fiber pads for safe contact inside spindles. Recommended cleaning accessory before gauging and performing measurements inside the spindle.

Axial Collet Clamping Grippers for HSK 100 Grinding Wheels
Axial Collet Clamping Grippers for HSK 100 Grinding Wheels

The AZS gripper is specially designed to manually mount heavy grinding wheels to a standard HSK 100 tool interface. The grinding wheel is mounted onto a HSK-style tool holder and is held to the spindle extremely accurately. The gripper allows very high clamping forces in a compact design. For example, the clamping force is 55 kN with a clamping torque of only 30 Nm for HSK 100. If needed, this AXS-100 gripper could be adapted for any HSK standard.

Mounting Nuts for HSK-A/C Interface Adaption
Mounting Nuts for HSK-A/C Interface Adaption

Can be mounted in front of the spindle shaft after the installation of the collet. Has the advantage of being adaptable to HSK-E or HSK-F tool interfaces in an HSK-A spindle. Just use the drive key to expand and then clamp the desired tool. The ENS slot nuts can also be used in manual clamping units for more flexibility. Available for HSK 32, 40, 50, 63, 80, and 100.

KS Adapter Flanges with Angular Alignment
KS Adapter Flanges with Angular Alignment

Used for fitting onto machine spindle for holding HSK tools. Available for HSK-C 32, 40, 50, 63, 80, 100.

KS Assembly Spanners
KS Assembly Spanners

Available for HSK-C 32, 40, 50, 63, 80, 100. Also available MLC-cartridges for HSK-C 40, 50, 63, 80, 100.

HSK-A Fine Boring Tools
HSK-A Fine Boring Tools

Available for HSK-A 63, 100

Page loaded in 0.1466 seconds.