683.584
HSK-C Integrated Spindle Adapter Flanges
- With larger axial plane - Includes clamping set - Includes brass locking ring - Includes indexing pin and retention screws
PDF Data Sheet: HSK-C Integrated Spindle Adapter Flanges (683.584)
| Taper | Length (l1) | Ø (d2) | d3 | l2 | SW | Part Number | ||
|---|---|---|---|---|---|---|---|---|
| HSK-C 32 | 12.5 | 40 | 27.0 | 21.10 | 2.5 | 683.4584.024.000 | ||
| HSK-C 40 | 15.0 | 50 | 33.5 | 25.70 | 3.0 | 683.4584.030.000 | ||
| HSK-C 50 | 17.5 | 63 | 42.0 | 32.10 | 4.0 | 683.4584.038.000 | ||
| HSK-C 63 | 22.5 | 80 | 55.0 | 40.05 | 5.0 | 683.4584.048.000 | ||
| HSK-C 80 | 27.5 | 100 | 68.0 | 51.40 | 6.0 | 683.4584.060.000 | ||
| HSK-C 100 | 30.0 | 125 | 88.0 | 64.00 | 8.0 | 683.4584.075.000 |
Product Information • With larger axial plane
• The interface between spindle and flange must be taken into consideration for the transferable torsional moment
Scope of Delivery • Includes clamping set
• Includes brass locking ring
• Includes indexing pin and retention screws
For more information regarding this item (HSK-C Integrated Spindle Adapter Flanges) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
KS Adapter Flanges
Used for fitting onto machine spindle or in standard SK adapters for holding HSK tools. Available for HSK-C 32, 40, 50, 63, 80, 100
KS Adapter Flanges with Angular Alignment
Used for fitting onto machine spindle for holding HSK tools. Available for HSK-C 32, 40, 50, 63, 80, 100.
KS Adapter Flanges with Angular Alignment
For fitting onto the machine spindle or on HSK or ISO adapters for holding HSK tools. Can be precisely set in radial run-out by using threaded pins (for alignment) on the machine spindle and on HSK or ISO adapters. Can be precisely set in face run-out using alignment screws (thrust pad and threaded pin) in the adapter flange. Available for HSK-C 32, 40, 50, 63, 80, 100.
KS Adapter Flanges with Radial Alignment
Used for fitting onto the machine spindle or on HSK or ISO adapters for holding HSK tools. Can be precisely set in radial run-out by using threaded-pins (for alignment) on the machine spindle and on HSK or SK adapters.
KS Adapter Flanges for Short Spindles
With radial alignment. Used for fitting into short spindles (DIN 69002) for holding HSK tools. Available for HSK-C 32, 40, 50, 63.
HSK-C Locking Rings for Adapter Flanges
Available for HSK-C 25, 32, 40, 50, 63, 80, 100
PSK/PSC Adaptor Flanges
Capto (Polygonal Taper) adapter flanges are a one-piece design available for C3, C4, C5, C6, C8 PSC tapers. Ideal for tool holder blank building or other mounting capabilities with the Coromant Capto tool holder system.
HSK-C Front Adapter Flanges
- Includes clamping set
- Includes brass locking ring
- Includes indexing pin and retention screw
Submit your feedback