410.220.000.000
Indicator Column Electronic Tool Taper Gauges
Periodic verification of HSK tool shafts for optimum performance of the HSK system
Full Data Sheet (410.220)
PDF Data Sheet: Electronic Tool Taper Gauges (410.220)| Product | Gauge |
| Part Type | Spindle Taper |
| Taper / Standard | Indicator Column |
| HSK A/C/E | HSK B/D/F | d2 | d3 | l2 | l3 | Part Number | ||
|---|---|---|---|---|---|---|---|---|
| Indicator Column | 410.220.000.000 | |||||||
| HSK-A 25 | HSK 32 | 19.000 | 18.1500 | 2.5 | 8.5 | 410.220.125.000 | ||
| HSK-A 32 | HSK 40 | 24.007 | 23.2755 | 3.2 | 7.3 | 410.220.132.000 | ||
| HSK-A 40 | HSK 50 | 30.007 | 29.0551 | 4.0 | 4.5 | 410.220.140.000 | ||
| HSK-A 50 | HSK 63 | 38.009 | 36.9068 | 5.0 | 11.0 | 410.220.150.000 | ||
| HSK-A 63 | HSK 80 | 48.010 | 46.5370 | 6.3 | 14.7 | 410.220.163.000 | ||
| HSK-A 80 | HSK 100 | 60.012 | 58.1082 | 8.0 | 19.0 | 410.220.180.000 | ||
| HSK-A 100 | HSK 125 | 75.013 | 72.6082 | 10.0 | 24.0 | 410.220.190.000 |
For more information regarding this item (Indicator Column Electronic Tool Taper Gauges) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
Electronic Tool Taper Gauges
The four transducers mounted in the measuring ring are used for differential measurement of gauge dimensions d2 and d3. Deviations from the calibrated taper plug gauge are shown on the two indicator columns.
Series 410 Dial Indicator Tool Taper Gauges
Both measuring gauges are set to zero with the calibrated taper plug gauge. When an HSK tool holder is inserted in the ring gauges, deviations in diameters d2 or d3 are shown on the indicator.
Pneumatic HSK Tool Holder Taper Gauge Kits
Gauging kit for HSK tool holder taper with pneumatic measuring column. The Multifunctional Measuring and Control Device is designed for high precision and multifunctional capabilities. In addition to providing various ways for measuring input, it can be customized to meet customer requirements.
Taper Plug Gauges With Indicator Mounts
Taper gauges can be custom-manufactured to customer specifications. Hard chrome-plate and tungsten carbide gauges also available.
Cases are not included. Contact us for high quality gauge crib and travel case options.
Pneumatic Steep Taper Tool Holder Taper Gauge Kits
Gauging kit for Steep Taper, CAT/ANSI, ISO, BT tool holder tapers with pneumatic column. The Multifunctional Measuring and Control Device is designed for high precision and multifunctional capabilities. In addition to providing various ways for measuring input, it can be customized to meet customer requirements.
HSK Tool Holder Taper 30 Degree Clamping Angle Gauges
Using the calibrated master, the distance of the 30 degree clamping slope relative to l 2 is preset using the dial indicator holder. The tool taper to be measured is placed in the centering piece, allowing the variation of the taper to be measured.
Tool Holder Drive Key Tool Taper Gauges
Available for HSK 32, 40, 50, 63, 80, 100, 125, 160
HSK Dial Indicator Spindle Taper Gauge Manual
Instruction manual for the dial indicator spindle taper gauge (410.310)
Dial Indicator Spindle Taper Gauges
To ensure sustained accuracy at HSK interfaces, we recommend comparison measuring of the geometry of HSK tool shanks and spindles at regular intervals. These checks should become more frequent with an increased change rate at the interface. Calibration on request.
Pneumatic Spindle Taper Gauges
Non-contact measuring with nozzles results in high accuracy and consistency of measuring results. The measuring range can be increased with the built-in dial indicator. This enables the gauge to be used during pre-machining of the taper. Measuring set with case includes nozzle plug gauge with dial indicator and 2 setting rings.
Submit your feedback