440.135.29299
HSK-A 63 Taper / HSK-A 80 Flange Tool Changer Alignment Gauges
Full Data Sheet (440.100)
PDF Data Sheet: HSK Tool Changer Alignment Gauges (440.100)| Product | Gauge |
| Part Type | Tool Changer Alignment |
| Taper / Standard | HSK-A 63 Taper / |
| Taper Size | HSK-A 80 Flange |
| Taper | Part Number | |||||||
|---|---|---|---|---|---|---|---|---|
| HSK-E 25 | 440.135.125.000 | |||||||
| HSK-A/E 32 | 440.135.132.000 | |||||||
| HSK-A/E 40 | 440.135.140.000 | |||||||
| HSK-A/E 50 | 440.135.150.000 | |||||||
| HSK-A/E 63 | 440.135.163.000 | |||||||
| HSK-A 80 | 440.135.180.000 | |||||||
| HSK-A 100 | 440.135.190.000 | |||||||
| HSK-A 125 | 440.135.192.000 | |||||||
| HSK-A 160 | 440.135.196.000 | |||||||
| HSK-A 63 Taper / HSK-A 80 Flange | 440.135.29299 | |||||||
| HSK-F 63 | 440.135.663.000 | |||||||
| HSK-F 80 For Makino Flange-Pin Spindles | 440.135.680.000 |
For more information regarding this item (HSK-A 63 Taper / HSK-A 80 Flange Tool Changer Alignment Gauges) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
HSK Spindle Runout Test Arbors
- Maximum runout error 0.003mm / 3 micron / 0.00012 inch.
- Carrying cases are not included. Visit Data Sheet 465.006 for available case styles.
- A certificate of accuracy is included. Traceable certificates available; contact us for details.
- Contact us for other lengths, tapers, and other special requirements.
ForceCheck Force Gauge Base Set - Wired
Sets include display, connecting cable, and carrying case. Measuring bars, adapters, and other accessories are ordered separately.
ForceCheck Drawbar Force Gauge Base Set, Wireless
Sets include wireless display and carrying case. Measuring bars, adapters, and other accessories are ordered separately.
Machine-Integrated Drawbar Force Gauges
The machine-integrated drawbar force gauge automates drawbar force measurement. With a wireless force sensor stored in the tool changer, a machine can periodically automatically check the drawbar without stopping production. Drawbar force is returned to the machine control via a wireless receiver, automatically alerting the operator if insufficient force is detected.
Submit your feedback