461.310
ForceCheck ForceCheck Force Gauge Base Set - Wired
Sets include display, connecting cable, and carrying case. Measuring bars, adapters, and other accessories are ordered separately.
PDF Data Sheet: ForceCheck ForceCheck Force Gauge Base Set - Wired (461.310)
| Part Number | ||||||||
|---|---|---|---|---|---|---|---|---|
| ForceCheck Base Set | 461.310.000.000 |
HSK Drawbar Force Gauge Sensors, Wired
Wired Forcecheck sensors also require a wired display unit and connecting cable to fully function.
Steep Taper (CAT/ANSI) Wired ForceCheck Sensors
Wired Forcecheck sensors also require a wired display unit and connecting cable to fully function.
Steep Taper (BT) Wired ForceCheck Sensors
Wired Forcecheck sensors also require a wired display unit and connecting cable to fully function.
| ForceCheck Sensor, Wired | Part Number | |||||||
|---|---|---|---|---|---|---|---|---|
| Steep Taper (BT) 30 | 461.200.730.000 | |||||||
| Steep Taper (BT) 35 | 461.200.735.000 | |||||||
| Steep Taper (BT) 40 | 461.200.740.000 | |||||||
| Steep Taper (BT) 50 | 461.200.750.000 | |||||||
| ForceCheck Base Set | 461.310.000.000 |
Steep Taper (DIN) Wired ForceCheck Sensors
Wired Forcecheck sensors also require a wired display unit and connecting cable to fully function.
PSK/PSC Wired ForceCheck Sensors
Wired Forcecheck sensors also require a wired display unit and connecting cable to fully function.
| ForceCheck Sensor, Wired | Part Number | |||||||
|---|---|---|---|---|---|---|---|---|
| PSK/PSC C3 | 461.200.C03.000 | |||||||
| PSK/PSC C4 | 461.200.C04.000 | |||||||
| PSK/PSC C5 | 461.200.C05.000 | |||||||
| PSK/PSC C6 | 461.200.C06.000 | |||||||
| PSK/PSC C8 | 461.200.C08.000 | |||||||
| PSK/PSC C10 | 461.200.C10.000 | |||||||
| PSK/PSC C8X | 461.200.C8X.000 |
KM Wired ForceCheck Sensors
Wired Forcecheck sensors also require a wired display unit and connecting cable to fully function.
| ForceCheck Sensor, Wired | Part Number | |||||||
|---|---|---|---|---|---|---|---|---|
| KM 32 | 461.200.K32.000 | |||||||
| KM 40 | 461.200.K40.000 | |||||||
| KM 50 | 461.200.K50.000 | |||||||
| KM 63 | 461.200.K63.000 | |||||||
| KM 6350 | 461.200.K65.000 | |||||||
| KM 80 | 461.200.K80.000 | |||||||
| KM 100 | 461.200.K90.000 | |||||||
| KM 10080 | 461.200.K98.000 | |||||||
| KM4X 63 | 461.200.K63.04B | |||||||
| KM4X 100 | 461.200.K90.04B |
Steep Taper (ISO) Wired ForceCheck Sensors
Wired Forcecheck sensors also require a wired display unit and connecting cable to fully function.
| ForceCheck Sensor, Wired | Part Number | |||||||
|---|---|---|---|---|---|---|---|---|
| Steep Taper (ISO) 10 | 461.200.A10.000 | |||||||
| Steep Taper (ISO) 15 | 461.200.A15.000 | |||||||
| Steep Taper (ISO) 20 | 461.200.A20.000 | |||||||
| Steep Taper (ISO) 25 | 461.200.A25.000 |
ForceCheck Sensor for Lyndex-Nikken NC5
Wired Forcecheck sensors also require a wired display unit and connecting cable to fully function.
| ForceCheck Sensor, Wired | Part Number | |||||||
|---|---|---|---|---|---|---|---|---|
| Lyndex-Nikken NC5-46 | 461.200.L46.000 | |||||||
| Lyndex-Nikken NC5-53 | 461.200.L53.000 | |||||||
| Lyndex-Nikken NC5-63 | 461.200.L63.000 | |||||||
| Lyndex-Nikken NC5-85 | 461.200.L85.000 | |||||||
| Lyndex-Nikken NC5-100 | 461.200.L90.000 |
Chuck Force Gauges - Wired
Designed to quickly check the holding force on a chuck or turning-center. The wired chuck force gauge can be customized for any diameter.
| Measuring Diameter | Jaws | Diameter | Force Range (per Jaw) | Part Number | ||||
|---|---|---|---|---|---|---|---|---|
| D28 | 2 / 3 | 28 mm / 1.10 in. | 0...15kN / 3,400 lb-F | 495.200.028.003 | ||||
| D72 | 2 / 3 | 72 mm / 2.83 in. | 0...50kN / 11,200 lb-F | 495.200.072.003 | ||||
| D125 | 2 / 3 / 4 | 125 mm / 4.92 in. | 0...65kN / 14,600 lb-F | 495.200.125.004 | ||||
| D200 | 2 / 3 / 4 / 6 | 200 mm / 7.87 in. | 0...100kN / 22,500 lb-F | 495.200.200.006 | ||||
| D28 (Low Force) | 2 / 3 | 28 mm / 1.10 in. | Contact us | 495.200.028.003.LF | ||||
| D72 (Low Force) | 2 / 3 | 72 mm / 2.83 in. | Contact us | 495.200.072.003.LF | ||||
| D125 (Low Force) | 2 / 3 / 4 | 125 mm / 4.92 in. | Contact us | 495.200.125.004.LF | ||||
| D200 (Low Force) | 2 / 3 / 4 / 6 | 200 mm / 7.87 in. | Contact us | 495.200.200.006.LF |
ForceCheck Workholding Collet Force Gauge
ForceCheck collet force gauges provide a quick and easy way to check force on collet workholding systems.
Applications for ForceCheck workholding collet force gauges include:
-Comparison of holding force between machines, allowing for consistent and repeatable production results regardless of mechanism (manual, hydraulic, or pneumatic)
-Periodic verification to assess if preventive maintenance is needed
-Establish correct holding force for running a particular part or job
-Determine optimal holding force for thin-wall, rings, and other parts sensitive to damage or distortion when machining
A sensor is needed for each diameter to be measured. A ForceCheck base set with display is needed to display results (order separately).
Sensors are also available in low-force versions. Contact us for further information.
Sets include display readout unit, connecting cable for wired unit, and carrying case. Measuring bars, adapters, and other accessories are ordered separately.
For more information regarding this item (ForceCheck ForceCheck Force Gauge Base Set - Wired) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
Large Diameter VTL Chuck Force Gauges
Measure clamping force on 12+ inch diameter chucks. Available as wired or wireless sensor unit. Base set is separate which includes wired or wireless read-out display, custom case, and accessories for the sensor.
HSK Taper Wired Force Measuring Bars
Wired Forcecheck sensors also require a wired display unit and connecting cable to fully function.
ForceCheck Workholding Collet Force Gauge
ForceCheck collet force gauges provide a quick and easy way to check force on collet workholding systems.
Applications for ForceCheck workholding collet force gauges include:
-Comparison of holding force between machines, allowing for consistent and repeatable production results regardless of mechanism (manual, hydraulic, or pneumatic)
-Periodic verification to assess if preventive maintenance is needed
-Establish correct holding force for running a particular part or job
-Determine optimal holding force for thin-wall, rings, and other parts sensitive to damage or distortion when machining
A sensor is needed for each diameter to be measured. A ForceCheck base set with display is needed to display results (order separately).
Sensors are also available in low-force versions. Contact us for further information.
HSK Drawbar Force Gauge Sensors, Wired
Wired Forcecheck sensors also require a wired display unit and connecting cable to fully function.
Chuck Force Gauges - Wired
Designed to quickly check the holding force on a chuck or turning-center. The wired chuck force gauge can be customized for any diameter.
Steep Taper (CAT/ANSI) Wired ForceCheck Sensors
Wired Forcecheck sensors also require a wired display unit and connecting cable to fully function.
Steep Taper (DIN) Wired ForceCheck Sensors
Wired Forcecheck sensors also require a wired display unit and connecting cable to fully function.
Steep Taper (ISO) Wired ForceCheck Sensors
Wired Forcecheck sensors also require a wired display unit and connecting cable to fully function.
Drawbar Force Base Unit and Accessories
Various accessories, base sets, and custom items for the ForceCheck system.
Submit your feedback