HSK Taper ForceCheck Wireless Drawbar Force Sensors

The ForceCheck wireless drawbar force gauge is based on the same technology as the industry-leading ForceCheck gauge. With the added convenience of wireless operation, larger machines and hard-to-reach spindles are easier to check. In addition, the unit offers the optional capability of data logging on a USB stick.

Workholding Collet Drawbar Force Gauge

ForceCheck collet force gauges measure the drawbar pullback force of a 5C, 16C, or 20C collet workholding system. Measurement of collet drawbar force provides an easy way to ensure correct force from machine to machine, or between setups for different parts.

Wireless Drawbar Force Gauges

The ForceCheck wireless drawbar force gauge is based on the same technology as the industry-leading ForceCheck gauge. With the added convenience of wireless operation, larger machines and hard-to-reach spindles are easier to check.

ForceCheck Drawbar Force Gauge Base Set, Wireless

Sets include wireless display and carrying case. Measuring bars, adapters, and other accessories are ordered separately.

Collet Force Gauges

Machine-Integrated Drawbar Force Gauges

The machine-integrated drawbar force gauge automates drawbar force measurement. With a wireless force sensor stored in the tool changer, a machine can periodically automatically check the drawbar without stopping production. Drawbar force is returned to the machine control via a wireless receiver, automatically alerting the operator if insufficient force is detected.

Steep Taper (MAS 403 BT) Drawbar Force Gauges

Measuring bars, complete sets, and base sets for Steep Taper (MAS 403-BT) JIS standard.

HSK Drawbar Force Gauge Complete Sets, Wired

Wired complete sets include corresponding drawbar force gauge, display readout unit, connecting cable for wired unit, special carrying case, and certificate.

ForceCheck Workholding Collet Force Gauge

ForceCheck collet force gauges provide a quick and easy way to check force on collet workholding systems.

Applications for ForceCheck workholding collet force gauges include:

-Comparison of holding force between machines, allowing for consistent and repeatable production results regardless of mechanism (manual, hydraulic, or pneumatic)
-Periodic verification to assess if preventive maintenance is needed
-Establish correct holding force for running a particular part or job
-Determine optimal holding force for thin-wall, rings, and other parts sensitive to damage or distortion when machining


A sensor is needed for each diameter to be measured. A ForceCheck base set with display is needed to display results (order separately).
Sensors are also available in low-force versions. Contact us for further information.