292-PCFG
BERG BERG Pallet Holding Force Gauges
Includes measuring case, display unit, measuring cartridge, test certificate, and clamping head specific pull studs
PDF Data Sheet: BERG BERG Pallet Holding Force Gauges (292-PCFG)
Application
The BERG clamping force measuring system for clamping heads is intended to measure the force of individual clamping heads. The transfer of data via the series interface makes it possible to check and document all clamping positions.
Design features
The measuring system consists of a sturdy, handy display unit, the measuring cartridge with integrated force sensor as well as the clamping bolts required for the respective clamping head. The measuring data can be transferred to a Windows PC via a serial interface of the hand-held display unit. The measuring system comes in a sturdy plastic measuring case, accommodating the display unit, measuring cartridge and clamping head specific pull studs.
For more information regarding this item (BERG BERG Pallet Holding Force Gauges) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
SPH Pallet Clamping Heads
BERG Spanntechnik series SPH clamping heads are primarily used for horizontal pallet clamping. The heads form the basis of a highly rigid, high precision repeatable workholding solution. In addition to clamping heads, non-active units are available for setup and storage stations. Heads are supplied as a matched set with 0.005mm accuracy.
SPH-V Pallet Clamping Heads
Clamping heads of the series SPH-V are principally used in machining centers for vertical pallet clamping. The series SPH-V is based on the basic principle of the SPH. The additional internal self-locking system retains the clamping force even when hydraulic pressure is not present. It is possible to machine workpieces on a vertical pallet after clamping without a hydraulic connection
- without any reduction in safety!
SPM-HV Pallet Clamping Heads
SPM-HV series pallet clamping heads are used for pallet clamping on single or double axis indexing tables. With the clamping heads and matching tapered rings, maximum workpiece position repeatability and precision is possible.
Submit your feedback