465.V50.59767
VDI 50 Mazak VDI Lathe Turret Alignment Bars
Per DIN 69880 standard
Full Data Sheet (465.V00)
PDF Data Sheet: VDI Lathe Turret Alignment Bars (465.V00)| DIN 69880 | d1 (mm) | d3 (mm) | L1 (mm) | Part Number | ||||
|---|---|---|---|---|---|---|---|---|
| VDI Special Configuration | Contact us with your requirements | 465.V00.SP | ||||||
| VDI 16 | 16 | 30 | 120 | 465.V16.000.000 | ||||
| VDI 20 | 20 | 40 | 150 | 465.V20.000.000 | ||||
| VDI 25 | 25 | 40 | 150 | 465.V25.000.000 | ||||
| VDI 30 | 30 | Contact Us | 465.V30.000.000 | |||||
| VDI 40 | 40 | 40 | 200 | 465.V40.000.000 | ||||
| VDI 50 | 50 | Contact Us | 465.V50.000.000 | |||||
| VDI 50 Mazak | 50 | 40 | 200 | 465.V50.59767 | ||||
| VDI 60 | 60 | 40 | 200 | 465.V60.000.000 |
For more information regarding this item (VDI 50 Mazak VDI Lathe Turret Alignment Bars) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
VDI Lathe Turret Alignment Bars
Lathe turret alignment bar for VDI interface. Used for both testing concentricity of the interface as well as center alignment and adjustment on a lathe. Made to DIN 69880 standard.
465.V50.59767 is a special configuration used on certain Mazak machines. Contact us for further information.
Contact us for other sizes or special requirements/configurations.
Lathe Turret Alignment Bars
Lathe turret test bars provide an easy way to verify turret perpendicularity. Bars are installed in the turret like a standard tool. Test bars have an accuracy of 0.003mm (0.00012 inch) and include a carrying case and certificate.
VDI to HSK-C Basic Adapter Flanges
- For fixed, centered tools
- Includes clamping set
- Includes brass locking ring
Workbench Tool Mounting Fixtures
682.126 mounting fixtures have been discontinued. Link below for available alternatives.
Mounting unit partially pre-assembled, aluminum body, holding sleeve, swivel unit and clamping elements. Available for HSK, Capto PSK (PSC), Steep Taper (SK), and VDI.
KM Tool Changer Alignment Gauges
Improper alignment can result in abnormal wear on the spindle interface, tool changer, and tool holder.
In addition, mis-clamping and dropped tools can also occur.
KM gauges are available for ISO 26622 as well as Mazak Integrex flanges.
Sets include taper and flange, axial and radial alignment pins, and a padded carrying case.
A2 Flanged Lathe Spindle Runout Test Bars
Test arbor for mounting to turning-center and measuring run-out. Designed for A2-5, A2-6, etc. lathe face mounting. Also available for flat 110 and 140 lathe face.
- Maximum runout error 0.003mm [0.00012 in.]
PSC (PSK) Tool Changer Alignment Gauges
Available for Polygonal-Shank Taper sizes C3, C4, C5, C6, C8, C8X, C10. Includes padded storage case.
Lathe Spindle Face Ring
Series 492.026 ring gauges are for lathe spindle face.
Steep Taper Tool Changer Alignment Gauges
Available for Steep Taper 30, 40, 50, and 60. Includes padded storage case.
Submit your feedback