410.330.140.000
HSK-A 40 Drive Key Spindle Gauges
Measuring HSK spindle drive keys and radius
Full Data Sheet (410.330)
PDF Data Sheet: Drive Key Spindle Gauges (410.330)| Product | Gauge |
| Part Type | Spindle Taper |
| Taper / Standard | HSK-A |
| Taper Size | 40 |
| r1±0.025 | 2.0 |
| b1±0.05 | 7.8 |
| e1 | 11.081 |
| e2 | 5.903 |
| Taper | b1±0.05 | r1±0.025 | e1 | e2 | Part Number | |||
|---|---|---|---|---|---|---|---|---|
| HSK-A 32 | 6.8 | 1.5 | 8.905 | 4.903 | 410.330.132.000 | |||
| HSK-A 40 | 7.8 | 2.0 | 11.081 | 5.903 | 410.330.140.000 | |||
| HSK-A 50 | 10.3 | 2.5 | 13.997 | 7.648 | 410.330.150.000 | |||
| HSK-A 63 | 12.3 | 3.0 | 18.110 | 9.150 | 410.330.163.000 | |||
| HSK-A 80 | 15.8 | 4.0 | 22.073 | 11.898 | 410.330.180.000 | |||
| HSK-A 100 | 19.78 | 5.8 | 27.561 | 14.888 | 410.330.190.000 | |||
| HSK-A 125 | 24.78 | 6.0 | 35.580 | 18.388 | 410.330.192.000 | |||
| HSK-A 160 | 29.78 | 8.0 | 44.538 | 22.888 | 410.330.196.000 |
For more information regarding this item (HSK-A 40 Drive Key Spindle Gauges) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
Drive Key Spindle Gauges
When inserted in the spindle, the "go" gauge should be in contact with the plane face. The "no go" gauge should not contact the face. Two measuring gauges in storage case: "go" and "no go" plug gauges.
Tool Holder Drive Key Tool Taper Gauges
Available for HSK 32, 40, 50, 63, 80, 100, 125, 160
Mounting Nuts for HSK-A/C Interface Adaption
Can be mounted in front of the spindle shaft after the installation of the collet. Has the advantage of being adaptable to HSK-E or HSK-F tool interfaces in an HSK-A spindle. Just use the drive key to expand and then clamp the desired tool. The ENS slot nuts can also be used in manual clamping units for more flexibility. Available for HSK 32, 40, 50, 63, 80, and 100.
HSK Tool Holder Drive Key Gauge Manual
Measuring gauge for HSK tool holder taper drive key slots according to ISO 12164-1 (comparison measurement).
Download or print PDF data sheet for complete instructions.
HSK-A Shell End Mill Arbors for Milling Cutters with Longitudinal Slot or Tenon Drive
Available for HSK-A 40, 50, 63, 80, 100
HSK Standard Ball-End Runout Test Arbors
Ball end spindle runout test arbors are designed checking positioning accuracy of 5-axis machines, but can also be used in place of a standard runout test bars when a shorter length is required or for a touchoff point from the spindle face (ball end is ideal for this purpose).
Lathe Spindle Face Ring
Series 492.026 ring gauges are for lathe spindle face.
Morse Spindle Taper Plug Gauges
TAC Rockford Morse spindle taper gauges are for inspection of Morse spindle tapers. Gauges made from a hardened gauge steel, and include a certificate. Manufactured per DIN 229.
Rear-Clamp Manual Clamping Cartridges
355.621 series manual clamping cartridges are suitable for HSK-E and HSK-F holders that do not have drive key slots or an access hole on the side of the taper. In addition, the center bolt is compatible with standard HSK coolant tubes.
HSK-T Tool Holder Blanks
HSK-T tool holder blanks made to ICTM standard / ISO 12164-3
HSK-T blanks have tighter tolerances on the drive key slots, however they can in most cases also be used in HSK-A spindles.
Submit your feedback