230.207

Kuma Automatic Filter Devices

The soiled cooling lubricant is conveyed onto the non-woven filter lying in a cavity, via a liquid feed distributor. Owing to the gravitational force the coolant flows through the non-woven filter into a liquid container beneath the band filter. The dirt particles contained in the cooling lubricant are filtered out by the non-woven filter and accumulate in the form of a sludge cake on it. This causes a reduction of the permeability of the filter paper and, therefore, an increase of the liquid level above the filter cavity.

PDF Data Sheet: Kuma Automatic Filter Devices (230.207)

Automatic Filter Devices are designed for an automated purification of cooling lubricants. They are used in:
• Honing, grinding and glass grinding machines
• Tempering plants
• Washing plants

FunctionThe soiled cooling lubricant is conveyed onto the non-woven filter lying in a cavity, via a liquid feed distributor. Owing to the gravitational force the coolant flows through the non-woven filter into a liquid container beneath the band filter. The dirt particles contained in the cooling lubricant are filtered out by the non-woven filter and accumulate in the form of a sludge cake on it. This causes a reduction of the permeability of the filter paper and, therefore, an increase of the liquid level above the filter cavity. As the liquid level increases, an adjustable float-type switch controls the continuous transport of the non-woven filter driven by an electric motor. This way, non-woven filter clogged with dirt particles is discharged automatically driven by the quantity and permeability of the dirt accumulations. The dirty non-woven filter is conveyed into a sludge box installed at the end of the Automatic Filter device and can be removed from there without affecting the filtration process in any way. A Magnetic Filter Roll installed upstream allows the extraction of any ferritic dirt particles already before introducing the liquid onto the band filter, leading to a considerable reduction of paper consumption.

Structure • Solid steel plate design
• Closed non-woven storage box
• Endless wire mesh band serving as a support for the non-woven filter
• Discharge via the bottom side of the filter
• Helical gear motor or synchronous motor ensuring the drive
• Warning message: "non-woven lacking" (optional)


Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (Kuma Automatic Filter Devices) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias

Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

Vacuum Band Filters
Vacuum Band Filters

Continuous purification of soiled cooling lubricants, as they are produced when operating machine tools. Purification of liquids from industrial washing plants and dust extraction plants and systems. It makes sense to use such a Vacuum Band filter with high throughput rates, because the throughput in a Vacuum Band Filter is 3 to 4 times higher than in a Gravitation Band Filter while the filtration area is identical. The Vacuum Band Filter consumes less filtration material.

Internal Bed Filters
Internal Bed Filters

This type of filter can be used in all treatments where small chips and fine particles are to be filtered out of liquids even if these are of a rather high viscosity. This type of filter has proved its worth and efficiency not only in machining stations, but also in grinding machines, honing machines and wash water conditioning. This filter can be used as an individual system, but also for supplying several machines simultaneously.

Cooling Filtration Systems
Cooling Filtration Systems

Cooling Filtration Systems are designed for automatic purification cleaning and temperature equilibration of cooling lubricants. They are used in honing, grinding and glass grinding machines and in tempering and washing plants etc.

Coolant Supply Measuring Instruments
Coolant Supply Measuring Instruments

Quickly and simply check the filtering efficiency of the coolant system. Thanks to replaceable stainless steel filters, the user can adapt the instrument specifically to the filtering of the coolant system. Establishes the present condition of the individual system and displays the actual filter efficiency.

TRIBOS Application Example with SRE-R and SVP
TRIBOS Application Example with SRE-R and SVP

An example TRIBOS application with SRE-R inserts and SVP clamping devices.

Continuous Re-Cooling Power Units
Continuous Re-Cooling Power Units

The Re-Cooling Plant is easy to open for cleaning in applications where contaminated materials are processed. The lateral air aspiration device for the condenser is positioned at the top, which makes the dirt accumulations inside the condenser easy to see and, thus, easy to clean. Upon request, it is available with an air filter fitted to the condenser.

HSK Taper Wireless Force Measuring Bars
HSK Taper Wireless Force Measuring Bars

Wireless measuring adapters have the option of coming with or without the tool change groove. Wireless adapters can be retrofitted for quick inspection or designed for integrated use; ask us more for details.

TRIBOS SVP-4 Automatic Clamping Device
TRIBOS SVP-4 Automatic Clamping Device

Automatic clamping device for user-friendly reliable automatic actuation. Reliable clamping due to pre-set clamping pressure and clamping process only takes seconds.

Page loaded in 0.095 seconds.