291-SPRING

BERG Spring Stacks

BERG Spring Stacks (Click image to enlarge)
BERG Spring Stacks (Click image to enlarge)

Spring stacks are used in machining spindles for mechanically generating the actuation force for the clamping means.

PDF Data Sheet: BERG Spring Stacks (291-SPRING)

ApplicationSpring stacks are used in machining spindles for mechanically generating the actuation force for the clamping means.

Design FeaturesBERG Spanntechnik uses special disc springs developed for this spring stacks application and having a very high energy density. This permits compact spring packages and short spindle lengths. The single spring arrangement used makes it possible to achieve optimum power constancy without the lubrication-dependent jacket friction of multiple arrangements. The special springs are manufactured with substantially limited play to the draw-bar which leads to a very stable and well-balanced quality of the clamping system. The familiar problems associated with screw plate springs with torques during the spring stroke do not occur with these spring packages.
BERG spring packages are designed to be fatigue resistant.

OrderingSpring stacks are offered as spindle equipment in a complete unit including draw-bar, connector and actuation in combination with an attendant gripper set.


Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (BERG Spring Stacks) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias

Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

Special Multi-Characteristic Springs
Special Multi-Characteristic Springs

Röhrs special springs with two characteristics are a specialty, in which two spring characteristics are combined into one spring.

Spring Clips
Spring Clips

Spring clips with a C in the front are made of CK 75 G without a galvanized surface plating. Upon request, we can offer galvanic surface. The spring clips with an X in the front are made of 1.4310 (stainless steel).

Automatic Mechanical Disk Spring Washer Style Clamping Systems
Automatic Mechanical Disk Spring Washer Style Clamping Systems

The mechanical disk-spring washer style die clamping system is designed for clamping dies of various widths on press slides. The clamping actuator moves automatically in the T-slot of the press slide between the park position and the respective die. Clamping is performed by belleville spring washers and hydraulic unclamping.

Spring Combinations and Sets
Spring Combinations and Sets

Whenever a single compression, tension and helical disk spring alone does not meet the requirements, we individually design spring combinations and spring sets for our customers. By this means, we achieve significant successes regarding spring loads, operational safety, durability and installation length.

Helical Disk Spring Power Packs
Helical Disk Spring Power Packs

This power pack is composed of a quadruplicated screwed together helical disk spring. It is applied in hydrogen fuel cells featuring a high energy density for instance (e.g. satellites / submarines).

Helical Disk Springs
Helical Disk Springs

With our patented helical disk spring, Roehrs can offer our customers a proven and tested machine component, which in many cases replaces the common multi-layer disc spring assembly.

Surge Dampers
Surge Dampers

- Multi-wire spring element with very high damping behavior, even at high variations in temperature - Different spring designs to meet customer requirements - Resistant to oil, grease, solvents etc. - High operational safety due to high energy absorption

Capto Clamping Systems
Capto Clamping Systems

BERG Spanntechnik is a leading supplier of Capto grippers and clamping systems.

HLZ Tool Clamping Cylinders
HLZ Tool Clamping Cylinders

HLZ hydraulic cylinders, in conjunction with spring actuated tool clamping and chucking devices, are intended for release and ejection of steep taper tooling and for stationary mounting.

Page loaded in 0.1152 seconds.