291-ADAPT
BERG Drawbar Adapters
Depending on the customer's requirements one or more media can be transmitted from the end of the spindle (actuation and/or rotary supply to the front HSK, SSK or Coromant Capto interface.
PDF Data Sheet: BERG Drawbar Adapters (291-ADAPT)ApplicationDepending on the customer's requirements one or more media can be transmitted from the end of the spindle (actuation and/or rotary supply to the front HSK, SSK or Coromant Capto interface.
Design FeaturesThe concentric transmission of the coolant can be separated from the off-centre transmission of the bleeding or control air by using the connector designed as a control slide valve or by closing the air channel by way of non-return valves. The selection and design of the medium transfer to the tool interface should always be considered in conjunction with the rear medium supply.
Ordering ExampleConnectors are offered as spindle equipment in a complete unit including draw-bar, spring stack and rear actuation in combination with an attendant gripper set.
For more information regarding this item (BERG Drawbar Adapters) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
Capto Hydraulic Self-Locking Clamping Systems
The self-limiting clamping system for Coromant Capto tools developed by BERG Spanntechnik is used in conjunction with Coromant Capto clamping sets. In this solution the wedge drive is rigidly connected to the clamping set via a drawbar.
HSK Hydraulic Self-Locking Clamping Systems
The self-limiting clamping system for HSK tools developed by BERG Spanntechnik is used in conjunction with the proven HSH clamping sets. In this solution the wedge drive itself is rigidly connected to the clamping set via a drawbar.
ForceCheck Drawbar Force Gauge Base Set, Wireless
Sets include wireless display and carrying case. Measuring bars, adapters, and other accessories are ordered separately.
Steep Taper Hydraulic Self-Locking Clamping Systems
The self-limiting clamping system for quick-release taper tools developed by BERG Spanntechnik is used in conjunction with the proven SSK clamping sets. In this solution the wedge drive itself is rigidly connected to the clamping set via a drawbar.
Drawbar Clamping Force Gauges, Wired
Tool clamping force is often never measured after a machine is put into service. Regular verification allows problems to be detected early so maintenance and repairs can be scheduled. As a result, emergencies and unexpected downtime can be avoided. When troubleshooting, drawbar performance can quickly be verified.
Machine-Integrated Drawbar Force Gauges
The machine-integrated drawbar force gauge automates drawbar force measurement. With a wireless force sensor stored in the tool changer, a machine can periodically automatically check the drawbar without stopping production. Drawbar force is returned to the machine control via a wireless receiver, automatically alerting the operator if insufficient force is detected.
Drawbar Clamping Measuring Bars
This critical performance -- the tool clamping force -- is often never measured after a machine is put into service. Regular verification allows problems to be detected early so maintenance and repairs can be scheduled. As a result, emergencies and unexpected downtime can be avoided. When troubleshooting, drawbar performance can quickly be verified.
Manual Mechanical Self-locking Drawbar Style Clamping Systems
The manually actuated drawbar style die clamping system is designed for clamping dies of various widths on press slides and tables. The self-locking eccentric cam gear guarantees a simple handling with a maximum of safety.
Manual Hydro-mechanical Self-locking Drawbar Style Clamping Systems
The hydromechanical self-locking (hydrolock) drawbar style die clamping system is designed for clamping dies of various widths on press slides. The clamping actuator can be moved manually in the T-slot of the press slide between the parking position and the respective die. Hydraulic pressure is at a maximum 90 bar.
Pallet Holding Force Gauges
Clamping force measuring gauges for pallets are intended to quickly measure the holding force of individual clamping heads. Pallet clamping adapters are per-application based, and are fitted according to the specifications of the customer's pallet system. Clamping adapters can be or have been provided for various pallet systems: BERG, Rohm, Mazak, OTT, Schunk, Erowa, and others.
Submit your feedback