240.320

Hydrostatic Linear Motor Guide

The PM Flow Controller makes it possible for machine builders to easily integrate custom hydrostatic systems into both new and existing machines.

PDF Data Sheet: Hydrostatic Linear Motor Guide (240.320)

An alternative to traditional mechanical components is a hydrostatic system in which the
slides, bearings, and other points of contact are separated by a thin layer of oil under pressure. This system, the patented PM Flow Controller, eliminates all metal-to-metal contact and virtually eliminates wear because components are "floating" on a very thin film of oil.

The PM Flow Controller is a self-contained mechanical device and thus does not require an electronic controller or an external pressure feedback device for operation. The PM Flow Controller maintains an almost steady-state of the hydrostatic gap in the hydrostatic pathways necessary to support a load regardless of grinding or cutting stress, the weight of a workpiece, or its location, by varying the pressure and flow of oil to the pocket.

The PM Flow Controller makes it possible for machine builders to easily integrate custom hydrostatic systems into both new and existing machines.

Features of Hydrostatic Linear Motor Guides • Friction-free at low speed, very low friction at higher speed
• Moves smaller than 0.1 micro-m possible
• No friction change when reversing direction, allowing for precise positioning
• No slip-stick effect at slow speed
• Floats on oil pockets independent of speed and load without any contact, so wear is not possible
• No precision loss, even under 24 hour operation at full load and maximum speed
• No variation of friction as with balls
• A hydrostatic system operates like a damper; excellent damping results in better workpiece surface and tool life
• Less sensitive to chips and other debris

Technical Features • The magnetic force of the motor is countered close to the motor fixture by wear free
hydrostatic pockets, resulting in reduced bending stress and bending deformation in
the slide and guideway
• Low production cost because no surfaces need to be ground to close tolerances
• Ideal for horizontal and vertical slides with large acceleration and speed


Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (Hydrostatic Linear Motor Guide) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias

Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

Hydrostatic Leadscrews
Hydrostatic Leadscrews

- Speed comparable to a linear motor - Very low friction when machining, virtually frictionless during positioning - Steps in the 0.1 micron range are possible - No backlash when reversing direction

Application: Hydrostatic Linear Motor Guide
Application: Hydrostatic Linear Motor Guide

Linear motors are used on high-speed machine tools with high acceleration and slide speeds. For slides with linear motors, HYPROSTATIK has developed hydrostatic guideways that have no wear, excellent damping characteristics, high stiffness and much lower friction when compared with ball or roller rails.

CBN Hydrostatic Grinding Spindle Systems
CBN Hydrostatic Grinding Spindle Systems

This is an example of a hydrostatic spindle designed for high speed grinding with CBN grinding wheels. The small bearing diameter in combination with high surface speed allows the use of CBN wheels even for undercuts in a camshaft application.

Application: Hydrostatic Rotary Tables
Application: Hydrostatic Rotary Tables

The world's largest gear and profile grinding machines use hydrostatic bearings.

Hydrostatic Lathe Spindles
Hydrostatic Lathe Spindles

- Very low friction will heat the spindle only slightly. Nearly all motor power gets to the workpiece. Heat that is generated is moved immediately out of the spindle area with the oil and cooled in the chiller. - No vibration from roller bearings for extremely smooth operation. - Excellent damping of vibration during grinding process, resulting in superior surface finish and workpiece accuracy. In addition, grinding wheels will stay sharp longer.

Comparison: Hydrostatic Leadscrews, Linear Motors, and Ballscrews
Comparison: Hydrostatic Leadscrews, Linear Motors, and Ballscrews

Design limitations and problems in ballscrew applications lead to the development of linear motors and to wear-free hydrostatic leadscrews. In this article we introduce the hydrostatic leadscrew system from HYPROSTATIK Schönfeld GmbH and compare its technical features with linear motor drives and ballscrews.

Hydrostatic Center Bearings
Hydrostatic Center Bearings

- Only one radial bearing - Moment and axial forces are carried by an axial bearing - Integrated clamping piston and rotating oil union for a hydraulic collet. The clamping piston is driven with hydrostatic oil and released with springs. - Extremely minimal friction (results in minimal warming during continuous operation, and more of the motor drive force applied to the workpiece).

Hydrostatic Grinding Spindles with Integral Motors
Hydrostatic Grinding Spindles with Integral Motors

- Very low friction will heat the spindle only slightly. Nearly all motor power gets to the workpiece. - Heat that is generated is moved immediately out of the spindle area with the oil and cooled in the chiller. - No vibration from roller bearings for extremely smooth operation. - Excellent damping of vibration during grinding process, resulting in superior surface finish and workpiece accuracy. In addition, grinding wheels will stay sharp longer.

Hydrostatic Application Worksheet
Hydrostatic Application Worksheet

Download the PDF data sheet for the Hydrostatic Application Worksheet

Page loaded in 0.129 seconds.