291-HSS

BERG HSK Grippers HSS and HSSL

BERG HSK Grippers HSS and HSSL (Click image to enlarge)
BERG HSK Grippers HSS and HSSL (Click image to enlarge)

The BERG Spanntechnik HSS gripper has been replaced by the HK and HKR. Replacement grippers are available for existing machines.

PDF Data Sheet: BERG HSK Grippers HSS and HSSL (291-HSS)

Application HSS gripper are intended for the clamping of hollow shank tooling according to DIN 69893 with central cooling lubricant supply. The HSSL version is used for dry machining.

Design Features HSS and HSSL gripper are primarily designed of four sturdy clamping claws and wedge drives, one centrally arranged draw-bolt as well as one sliding bush, actuated by means of a generously dimensioned coil spring.

Before the clamping force builds up, the draw-bolt brings the clamping claws into a stretched position. As such, for clamping, they are only able to move axially, not radially. Therefore, the clamping claws, as well as the tools and internal spindle contour are not subject to friction wear as in other designs which have a negative effect on the service life of tool and spindle.

Once the axial gap between tool and spindle has been bridged, the clamping force FS which amounts to several times the actuation force FB, builds up.

The main force flow between tool and spindle closes by means of the clamping claws and the wedge drive, the elements of which are not supported by an angled but rather by the easy to manufacture, square internal spindle contour.

The defined axial play between tool and clamping claws bridges the length tolerances of tool and spindle without reducing surface overlapping required to build up the clamping force.

In release direction, the wedge tapers of the spring loaded sliding bush compress the clamping claws for tool removal. The generously dimensioned face of the draw-bolt has been provided for tool ejection.

HSS gripper have an internal thread for check valve mounting.

Both collet designs may be assembled to form a complete unit by means of a standard socket wrench. The assembly tool MW being part of the delivery scope is used to push back the spring loaded slide bush during assembly and disassembly of the gripper. Subsequently, time consuming assembly and setting work is not required.

Note: The connection parts must be designed such, that when in release position, the back stop is reached either in the hydraulic cylinder or by means of spring force in the spindle. When clamped without a tool, the collet is supported in depth 'g' by the spindle shoulder.


Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (BERG HSK Grippers HSS and HSSL) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias

Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

Pull Studs / Retention Knobs
Pull Studs / Retention Knobs

High-precision retention knobs are available for use with BERG steep taper grippers.

Capto Clamping Systems
Capto Clamping Systems

BERG Spanntechnik is a leading supplier of Capto grippers and clamping systems.

Steep Taper Grippers SSKF
Steep Taper Grippers SSKF

With an easy-to-machine spindle contour, BERG Spanntechnik SSKF gripper is designed for cost-sensitive applications.

Steep Taper Grippers SSK
Steep Taper Grippers SSK

BERG Spanntechnik SSK series grippers are known worldwide for trouble-free operation. Available for CAT/ANSI, DIN, MAS/BT/JIS, and ISO. SSKS grippers are dimensionally the same as the SSK series, except are designed with additional features for high-speed operation.

Steep Taper Grippers SSKE-KH
Steep Taper Grippers SSKE-KH

SSKE-KH grippers are designed for applications requiring a shorter drawbar stroke.

Steep Taper Grippers SSKV
Steep Taper Grippers SSKV

The BERG Spanntechnik SSKV incorporates a number of new technical innovations, including tool holding force intensification and a special tribolic coating to ensure the highest possible constant clamping force.

Steep Taper Grippers SSKE
Steep Taper Grippers SSKE

Based on the popular SSK design, BERG Spanntechnik SSKE grippers use a common spindle contour for all retention knob standards, greatly simplifying design and production requirements for spindle manufacturers. SSKES grippers are dimensionally the same as the SSKE series, except are designed with additional features for high-speed operation.

HSK-F Shrink Fit Chucks (Standard Length)
HSK-F Shrink Fit Chucks (Standard Length)

For Carbide, Cermet and HSS tool shanks with tolerance h6. Available for HSK-F 63. Other sizes and profiles available on request.

Steep Taper Grippers SKR
Steep Taper Grippers SKR

The SKR gripper offers the unique capability of holding a tool with low force before the tool is clamped. This means that the spindle can pull away from the tool changer before tool clamping takes place (a key feature when fast tool change time is needed).

Page loaded in 0.1534 seconds.