Hyprostatik Schoenfeld Replacement Parts Service
Redirected from: Hydrostatic
For over 18 years, HYROSTATIK is leading on hydrostatic technology world wide. In the middle of the centre of machine tool industry - the south west of Germany - HYPROSTATIK put main impulses for further integration of the high-end technology hydrostatic in innovative, future orientated machine tool concepts. Leading machine tool manufacturer profits by the extraordinary features and convincing advantages by HYPROSTATIK:
- much smaller incremental move
- higher long term precision,
- multiple better damping,
- very low friction, for your machine
- for high speeds,
- extreme high stiffness
- smooth run without vibrations
Hydrostatic linear and round bearings
Hydrostatic guideways are used for linear and round move in machines. The slide suspend about 0,02mm on the red pockets. By control of the pressure and flow to the pockets by the patented PM-flow controller, high loads can be beared and high stiffness can be reached. The friction is so low, that a 60 tons heavy slide can be moved by hand. At slowly move, the friction is almost zero, which allow very slow moves and very small moves. The extreme good damping makes it possible to produce faster and more precise with less tool wear than with every other system.
Hydrostatic leadscrew with bearing
The hydrostatic leadscrew are used for wear free transfer of rotating move in linear move. The nut, suspending on hydrostatic pockets is free of backlash, prestressed and has even with high stiffness very low friction. So very slowly and very small moves are possible. Even at max. load and max. speed or acceleration in work all time, even with oscillating move, the stiffness and precision is not reduced. Adapted to every hydrostatic leadscrew, hydrostatic bearings are available.
Hydrostatic spindles are used for holding the workpiece or the tool in lathes, milling machines or grinding machines. Cause the spindle suspend on hydrostatic pockets, the spindle is wear free and has a multiple higher damping as at use of ball bearing. Also the axial and radial runout and the better damping is multiple better than of spindles with ball bearings. The circulation of hydrostatic oil cools and cleans the bearing all the time. So the spindle keeps cool - thermal errors are avoided. For the spindles adapted hydraulic power units with cooling system are available.
What exactly is your Spare Parts Service?
Transatlantic Connection supplies spare parts originating from Europe and Asia. We aren't the official US representative for most of the companies we supply parts for, but we can get the parts quickly and cost-effectively through our global network of suppliers and shipping companies. Buying those hard-to-find overseas parts from us is easy -- we handle all the international communication, payment, and shipping issues for you.
What information do I need to provide to you?
The more information the better. Typically, we would like to have whatever information can be found on the nameplate, but we need at least the manufacturer's name and part number. Information we would like to have when it is available/appropriate: serial number, town of manufacture, ratio (for gearboxes), electrical information (voltage, frequency, etc.)
Are you the official representative for all these companies?
Transatlantic Connection is the US representative for many companies, but we do not officially represent most of the companies we are able to supply replacement parts for.
Can I get parts faster than you have quoted?
Generally, yes. Parts typically arrive in the US via our weekly consolidated shipment, but we can coordinate a special shipment to save a few days. In extremely urgent cases, we are also able to arrange courier service. Should a critical spare part not be in stock at the manufacturer, we will also work with them to expedite production if possible.
Are you supplying the original part, or a substitute?
Transatlantic Connection supplies the original manufacturer part. If the original is no longer available, we will work with the manufacturer of the part to identify a suitable replacement.
Can you provide technical support for products?
For companies we represent, our technical staff in Rockford, IL is available to provide support. For parts from other manufacturers, our technical support team may not have the answer, but will work with the manufacturer to provide needed support. We are typically not able to provide technical support for parts not supplied by our company.
Will I be billed separately for international inbound freight, customs clearing, and duty costs?
In almost all cases, our quote to you includes all costs related to international shipment -- we won't surprise you with high additional charges at invoice. You only need to pay for the part and to get it from Rockford, Illinois to your location. In some cases, we may quote certain costs separately. If this is the case, the costs will be clearly shown on the quote.
Can you get "proprietary" parts?
Sometimes parts are custom-designed for a particular OEM. If this is the case, the parts are usually only available from the OEM. In certain instances, we are able to supply parts, so please contact us with information for your specific part.
Do you stock parts?
While we do stock some items, most items need to come from the manufacturer.
What types of parts are available?
Virtually any type of component is available. We have supplied parts for most typical industrial equipment, but also some unusual ones -- hydroelectric plants, ski lifts, wind turbines, and ships.
From what countries can you get parts?
Our supply chain is strongest in Germany, the UK, Japan, and Korea, but we can obtain parts from virtually all European and Asian countries.
The nameplate on my part is all in a foreign language. I don't know what number is what!
Send us a photo of the nameplate. Several of our staff members are multi-lingual and can help with translation.
How long do I have to wait for a quote?
For some items we have price lists, allowing us to quote right away. However, for most items, we need to check with the manufacturer for current pricing and lead time. Because of international time changes, this process typically takes at least a day, but can take longer depending on the time the manufacturer needs to calculate pricing.
Can you repair parts?
We can typically coordinate repair at the manufacturer. If a part is deemed unrepairable, we will only invoice for the shipment cost to the manufacturer and any evaluation charge they have.
What is the warranty on parts I purchase from Transatlantic Connection?
We extend the same warranty as the manufacturer of the part. Contact us for specifics on a particular part.
Hyprostatik Schoenfeld Replacement Part Request
If you would like a quotation for Hyprostatik Schoenfeld parts, please use the form below or contact us:
Location: 304 North Main Street, Suite 104, Rockford, IL 61101-1101 USA
If you have photos of the nameplate or part to send, please e-mail them. Pictures of the nameplate can be especially helpful in identifying replacements for older parts.