Mounting flange piece
To facilitate mounting and dismantling of tools
Mounting unit partially pre-assembled, aluminum body, holding sleeve, swivel unit and clamping elements. Available for HSK, Capto PSK (PSC), Steep Taper (SK), and VDI.
Standard SpecificationMounting unit partially pre-assembled, aluminum body, holding sleeve, swivel unit and clamping elements.
FunctionThe mounting unit consists of a cast aluminum body with a holding sleeve for holding the various flanges. The holding sleeve can be turning and clamped 90 degrees. The tool is clamped using a clamping lever.
NoteThe mounting unit is to be fixed to a workbench using 4 bores located in the aluminum body.
For more information regarding this item (Workbench Tool Mounting Fixtures) or other items, fill out the form below
or contact our office directly:
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Tapers are clamped vertically and horizontally at the collar. All tapers with the same diameter of the collar can be clamped with one fixture. Can be used with interchangeable 4991 series clamping discs/collars for multiple tapers: ISO 40 and 50, HSK-A/C 32, 40, 50, 63, 80, and 100.
HSK taper is clamped vertically and horizontally at the collar. All tapers with the same diameter of the collar can be clamped with one fixture. For HSK A, C, E, and F tapers 32, 40, 50, and 63.
HSK fixtures can be mounted to a surface just as the standard taper fixtures can. Dimension A is the distance between thread centers, G is the thread.
The Adjustable Mounting Fixture from Transatlantic Connection rotates a full 360 degrees for easy access to all sides of the tool holder. Designed for bench-top mounting.
The Basic Mounting Fixture is a simple yet effective way to work with your tool holders. The fixture is designed for mounting or simply holding in a vise. Additionally, in conjunction with a surface plate and height gauge, the mounting fixture can be used as an inexpensive alternative to a presetter.