683.554.075.000
HSK-C PowerClamp Manual Clamping Sets - HSK-C 100
Full Data Sheet (683.554)
PDF Data Sheet: HSK-C PowerClamp Manual Clamping Sets (683.554)| Product | Tool Holder |
| Part Type | Manual Clamping |
| Taper Size | 100 |
| Length (l1) | 117.0 |
| SW | 8.0 |
| Taper | Length (l1) | SW | Part Number | |||||
|---|---|---|---|---|---|---|---|---|
| HSK-C 25 | 32.1 | 2.0 | 683.554.019.000 | |||||
| HSK-C 32 | 41.6 | 2.5 | 683.554.024.000 | |||||
| HSK-C 40 | 49.7 | 3.0 | 683.554.030.000 | |||||
| HSK-C 50 | 62.2 | 4.0 | 683.554.038.000 | |||||
| HSK-C 63 | 74.1 | 5.0 | 683.554.048.000 | |||||
| HSK-C 80 | 96.1 | 6.0 | 683.554.060.000 | |||||
| HSK-C 100 | 117.0 | 8.0 | 683.554.075.000 |
For more information regarding this item (HSK-C PowerClamp Manual Clamping Sets - HSK-C 100) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
HSK-C PowerClamp Manual Clamping Sets
- For coolant up to 80 bar
- Includes installation and operating instructions
- Includes threaded pin
KS Clamping Cartridges (Standard)
Available HSK-C 32, 40, 50, 63, 80, 100
KS Clamping Cartridges for Minimal Lubrication (MLC)
Available for HSK-C 40, 50, 63, 80, 100
KS Clamping Cartridges for High Pressure
Available HSK-C 32, 40, 50, 63, 80, 100
HSK-C 4 Point Manual Clamping Sets for Conventional Cooling
- For a coolant pressure up to 80 bar
- Includes installation and operating instructions
MQL HSK-A Hydraulic Chucks for Manual Tool Change
Clamping diameter for shaft tolerance h6. Available for HSK-A 50, 63, 100.
Axial Collet Clamping Grippers for HSK 100 Grinding Wheels
The AZS gripper is specially designed to manually mount heavy grinding wheels to a standard HSK 100 tool interface. The grinding wheel is mounted onto a HSK-style tool holder and is held to the spindle extremely accurately. The gripper allows very high clamping forces in a compact design. For example, the clamping force is 55 kN with a clamping torque of only 30 Nm for HSK 100. If needed, this AXS-100 gripper could be adapted for any HSK standard.
MQL HSK-C 4 Point Manual Clamping Sets
The central and coaxial MQL supply with constant internal diameter prevents coolant from consolidating. For a coolant pressure up to 80 bar.
Mounting Nuts for HSK-A/C Interface Adaption
Can be mounted in front of the spindle shaft after the installation of the collet. Has the advantage of being adaptable to HSK-E or HSK-F tool interfaces in an HSK-A spindle. Just use the drive key to expand and then clamp the desired tool. The ENS slot nuts can also be used in manual clamping units for more flexibility. Available for HSK 32, 40, 50, 63, 80, and 100.
KS Assembly Spanners
Available for HSK-C 32, 40, 50, 63, 80, 100. Also available MLC-cartridges for HSK-C 40, 50, 63, 80, 100.
Submit your feedback