618.363.C04.000
Adapter, HSK-A63 Spindle to PSK C4
For converting HSK spindles to Polygon Sided Cone PSC/PSK tool taper
Full Data Sheet (618.C00)
PDF Data Sheet: HSK to PSK (PSC) Adapters (618.C00)| Product | Tool Holder |
| Part Type | Adapter |
| Taper / Standard | HSK-A |
| Taper Size | 63 |
| Adaption | PSK C4 |
| d1 | 40 |
| A | 80 |
| l1 | 54 |
| L | 112 |
| HSK Spindle | Adaption | d1 | A | l1 | L | Part Number | ||
|---|---|---|---|---|---|---|---|---|
| HSK-A 63 | PSK C3 | 32 | 75 | 49 | 107 | 618.363.C03.000 | ||
| HSK-A 63 | PSK C4 | 40 | 80 | 54 | 112 | 618.363.C04.000 | ||
| HSK-A 63 | PSK C5 | 50 | 90 | 64 | 122 | 618.363.C05.000 | ||
| HSK-A 100 | PSK C3 | 32 | 80 | 51 | 130 | 618.390.C03.000 | ||
| HSK-A 100 | PSK C4 | 40 | 90 | 61 | 140 | 618.390.C04.000 | ||
| HSK-A 100 | PSK C5 | 50 | 100 | 71 | 150 | 618.390.C05.000 | ||
| HSK-A 100 | PSK C6 | 63 | 110 | 81 | 160 | 618.390.C06.000 | ||
| HSK-A 100 | PSK C8 | 80 | 120 | 91 | 170 | 618.390.C08.000 |
For more information regarding this item (Adapter, HSK-A63 Spindle to PSK C4) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
PSK (PSC) Reducing Adapters
For holding PSK tools according to ISO 26623-1, d1 = nominal size PSK.
HSK to PSK (PSC) Adapters
For holding PSK tools ISO 26623-1, d1 = nominal size PSK. Available for HSK-A 63 and 100.
Steep Taper to PSK (PSC) Adapters
For holding PSK tools ISO 26623-1, d1 = nominal size PSK.
PSK Spindle Runout Test Arbors
Available for Polygonal-Shank Taper (Coromant Capto) sizes C3, C4, C5, C6, C8, and C10
PSK (PSC) Extension Adapters
For holding PSK tools according to ISO 26623-1, d1 = nominal size PSK.
KS Adapter Flanges
Used for fitting onto machine spindle or in standard SK adapters for holding HSK tools. Available for HSK-C 32, 40, 50, 63, 80, 100
HSK-A25 to 63 Tool Holder Blanks
TAC Rockford stocks HSK-A32, HSK-A40, HSK-A50, HSK-A63, HSK-A80, HSK-A100, and HSK-A125 in a variety of diameters and lengths. HSK-A160 blanks are available on request as well.
KS Adapter Flanges with Angular Alignment
For fitting onto the machine spindle or on HSK or ISO adapters for holding HSK tools. Can be precisely set in radial run-out by using threaded pins (for alignment) on the machine spindle and on HSK or ISO adapters. Can be precisely set in face run-out using alignment screws (thrust pad and threaded pin) in the adapter flange. Available for HSK-C 32, 40, 50, 63, 80, 100.
KS Adapter Flanges with Radial Alignment
Used for fitting onto the machine spindle or on HSK or ISO adapters for holding HSK tools. Can be precisely set in radial run-out by using threaded-pins (for alignment) on the machine spindle and on HSK or SK adapters.
Submit your feedback