683.4581.075.000

HSK-C Front Adapter Flanges - HSK-C 100

HSK-C Front Adapter Flanges - HSK-C 100

Zoom Enlarge Image

HSK-C Front Adapter Flanges - HSK-C 100

- Includes clamping set - Includes brass locking ring - Includes indexing pin and retention screw

HSK-C Front Adapter Flanges - HSK-C 100 (Click image to enlarge)
HSK-C Front Adapter Flanges - HSK-C 100 (Click image to enlarge)

Full Data Sheet (683.581)

PDF Data Sheet: HSK-C Front Adapter Flanges (683.581)

Product Tool Holder
Part Type Adapter Flange
Taper / Standard HSK
Taper Size 100
Ø (d2) 160
Length (l1) 57.0
l2 72.0
d3 86
SW 8.0


Taper (d1) Length (l1) Ø (d2) l2 d3 SW Part Number
HSK-C 25   20.0  45  26.5  23  2.0      683.4581.019.000
HSK-C 32   17.5  55  23.0  28  2.5      683.4581.024.000
HSK-A/C40   22.5  63  29.0  36  3.0      683.4581.030.000
HSK-C 50   27.5  80  36.0  46  4.0      683.4581.038.000
HSK-C 63   35.0  100  46.0  56  5.0      683.4581.048.000
HSK-C 80   45.0  125  58.0  66  6.0      683.4581.060.000
HSK-C 100  57.0  160  72.0  86  8.0      683.4581.075.000

Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (HSK-C Front Adapter Flanges - HSK-C 100) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias

Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

HSK-C Locking Rings for Adapter Flanges
HSK-C Locking Rings for Adapter Flanges

Available for HSK-C 25, 32, 40, 50, 63, 80, 100

KS Adapter Flanges
KS Adapter Flanges

Used for fitting onto machine spindle or in standard SK adapters for holding HSK tools. Available for HSK-C 32, 40, 50, 63, 80, 100

KS Adapter Flanges with Angular Alignment
KS Adapter Flanges with Angular Alignment

For fitting onto the machine spindle or on HSK or ISO adapters for holding HSK tools. Can be precisely set in radial run-out by using threaded pins (for alignment) on the machine spindle and on HSK or ISO adapters. Can be precisely set in face run-out using alignment screws (thrust pad and threaded pin) in the adapter flange. Available for HSK-C 32, 40, 50, 63, 80, 100.

KS Adapter Flanges with Angular Alignment
KS Adapter Flanges with Angular Alignment

Used for fitting onto machine spindle for holding HSK tools. Available for HSK-C 32, 40, 50, 63, 80, 100.

HSK-C Front Adapter Flanges
HSK-C Front Adapter Flanges

- Includes clamping set - Includes brass locking ring - Includes indexing pin and retention screw

Mounting Nuts for HSK-A/C Interface Adaption
Mounting Nuts for HSK-A/C Interface Adaption

Can be mounted in front of the spindle shaft after the installation of the collet. Has the advantage of being adaptable to HSK-E or HSK-F tool interfaces in an HSK-A spindle. Just use the drive key to expand and then clamp the desired tool. The ENS slot nuts can also be used in manual clamping units for more flexibility. Available for HSK 32, 40, 50, 63, 80, and 100.

KS Adapter Flanges for Short Spindles
KS Adapter Flanges for Short Spindles

With radial alignment. Used for fitting into short spindles (DIN 69002) for holding HSK tools. Available for HSK-C 32, 40, 50, 63.

HSK Manual Clamping Grippers with Axial Drive
HSK Manual Clamping Grippers with Axial Drive

The Axialspanner comes for clamping disc-shaped tools (grinding wheels, saw blades) on HSK-flanges used. With low tension moments high clamping forces are generated, which are more than 50% above the recommended for HSK shanks values. Depending on the application of the AXS is centrally operated from the front through a tool flange or from the rear through the spindle.

KS Adapter Flanges with Radial Alignment
KS Adapter Flanges with Radial Alignment

Used for fitting onto the machine spindle or on HSK or ISO adapters for holding HSK tools. Can be precisely set in radial run-out by using threaded-pins (for alignment) on the machine spindle and on HSK or SK adapters.

Page loaded in 0.1624 seconds.