683.554
HSK-C PowerClamp Manual Clamping Sets
- For coolant up to 80 bar - Includes installation and operating instructions - Includes threaded pin
PDF Data Sheet: HSK-C PowerClamp Manual Clamping Sets (683.554)
| Taper | Length (l1) | SW | Part Number | |||||
|---|---|---|---|---|---|---|---|---|
| HSK-C 25 | 32.1 | 2.0 | 683.554.019.000 | |||||
| HSK-C 32 | 41.6 | 2.5 | 683.554.024.000 | |||||
| HSK-C 40 | 49.7 | 3.0 | 683.554.030.000 | |||||
| HSK-C 50 | 62.2 | 4.0 | 683.554.038.000 | |||||
| HSK-C 63 | 74.1 | 5.0 | 683.554.048.000 | |||||
| HSK-C 80 | 96.1 | 6.0 | 683.554.060.000 | |||||
| HSK-C 100 | 117.0 | 8.0 | 683.554.075.000 |
For more information regarding this item (HSK-C PowerClamp Manual Clamping Sets) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
HSK-C 4 Point Manual Clamping Sets for Conventional Cooling
- For a coolant pressure up to 80 bar - Includes installation and operating instructions
MQL HSK-C 4 Point Manual Clamping Sets
The central and coaxial MQL supply with constant internal diameter prevents coolant from consolidating. For a coolant pressure up to 80 bar.
KS Clamping Cartridges (Standard)
Available HSK-C 32, 40, 50, 63, 80, 100
Clamping Cartridge Installation Tools
For the installation of 4-point clamping sets, if there are difficulties locking the spindle.
KS Clamping Cartridges for Minimal Lubrication (MLC)
Available for HSK-C 40, 50, 63, 80, 100
Rear-Clamp Manual Clamping Cartridges
355.621 series manual clamping cartridges are suitable for HSK-E and HSK-F holders that do not have drive key slots or an access hole on the side of the taper. In addition, the center bolt is compatible with standard HSK coolant tubes.
Submit your feedback