682.420.0010

Kelch HSK-A Reduction Sleeves for Straight Shanks with Lateral Driving Surface, Conical Version

similar to DIN 69 882-4

Available for HSK-A 63, 100

PDF Data Sheet: Kelch HSK-A Reduction Sleeves for Straight Shanks with Lateral Driving Surface, Conical Version (682.420.0010)

UseFor holding shank tools and lateral driving surface, DIN 1835 type B and DIN 6535 type HB.

DesignPermissible concentricity deviation of hollow taper shank to location hole d 1 = 0.003 mm (measured at 3 x D cantilever length). Chucks are fine balanced according to ISO 1940-1 G 2.5 at 25,000 rpm.

Standard SpecificationClamping screw included. From location hole d1 = 25 mm 2 clamping screws are included.

NoteFor an increased machining accuracy the bore tolerance is much reduced compared to DIN 1835. Other designs and sizes are available on request.


Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (Kelch HSK-A Reduction Sleeves for Straight Shanks with Lateral Driving Surface, Conical Version) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias

Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

HSK-A Reduction Sleeves for Morse Tapers with Tang
HSK-A Reduction Sleeves for Morse Tapers with Tang

Available for HSK-A 50, 63, 80, 100

HSK-A Reduction Sleeves for Morse Tapers with Thread
HSK-A Reduction Sleeves for Morse Tapers with Thread

Available for HSK-A 50, 63, 80, 100

HSK-A Drill Chucks
HSK-A Drill Chucks

Available for HSK-A 50, 63, 80, 100

LINS Cylindrical Linear Motors
LINS Cylindrical Linear Motors

Direct electric drive, high acceleration, extremely low noise, without reduction gear, no play at direction reversal, free of lateral forces, no rotor losses, and with NdFeB magnets. Contact us to adapt the electrical and mechanical design to your specific requirements.

Page loaded in 0.1039 seconds.