80.960.00

Zero Master Analog Setup Indicator - Analog Probe w/ Short Probe Tip, Metric

Zero Master Analog Setup Indicator - Analog Probe w/ Short Probe Tip, Metric

Zoom Enlarge Image

Zero Master Analog Setup Indicator - Analog Probe w/ Short Probe Tip, Metric

The Zero Master is the smallest 3D-Sensor worldwide. Usage, function and accuracy are equal to the Universal 3D-Sensor. The size of the Zero Master is adapted to small machines. The clamping shank has a diameter of 10 mm. Thus it can be also used on machines with ISO 30 or with small HSK spindles. The housing is shortened and does not protrude far out of the spindle so that even big work pieces can be measured. The Zero Master can be read with a small analog dial gauge.

Zero Master Analog Setup Indicator - Analog Probe w/ Short Probe Tip, Metric (Click image to enlarge)
Zero Master Analog Setup Indicator - Analog Probe w/ Short Probe Tip, Metric (Click image to enlarge)

Full Data Sheet (570.111)

PDF Data Sheet: Zero Master Analog Setup Indicator (570.111)

Product Accessory
Part Type Machine Setup Indicator
Probe Dia. 4 mm
Accuracy 0.01 mm
Probe Length 25 mm


Item Probe Dia. Accuracy Probe Length Part Number
Short Probe Tip       4 mm    0.01 mm  -    80.362.00
Long Probe Tip       8 mm    0.01 mm  -    80.363.00
Long 3-D Probe Tip       0.4"      2.6"    80.365.30
Analog Probe w/ Short Probe Tip, Metric      4 mm    0.01 mm  25 mm    80.960.00
Analog Probe w/ Short Probe Tip, Inch       0.2"    0.0004"  1"    80.960.00.IN

Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (Zero Master Analog Setup Indicator - Analog Probe w/ Short Probe Tip, Metric) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias

Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

Zero Master Analog Setup Indicator
Zero Master Analog Setup Indicator

The Zero Master is the smallest 3D-Sensor worldwide. Usage, function and accuracy are equal to the Universal 3D-Sensor. The size of the Zero Master is adapted to small machines. The clamping shank has a diameter of 10 mm. Thus it can be also used on machines with ISO 30 or with small HSK spindles. The housing is shortened and does not protrude far out of the spindle so that even big work pieces can be measured. The Zero Master can be read with a small analog dial gauge.

Centro Setup Indicator
Centro Setup Indicator

With the CENTRO, bores and shafts can be easily and precisely centered. The CENTRO is clamped into a tool holder and inserted into the spindle of the milling machine. The machine spindle is then positioned near the bore or shaft that is to be measured, and rotates at low speed.

3D Universal  Setup Indicator
3D Universal Setup Indicator

Short and long probes are available. The sensor probes may be changed without any tool. No re-calibration of the unit is needed during a sensor probe change over. Simply bring the needle to Zero, and that is your edge with any probe. The accuracy is such that you are able to inspect your parts right on the machine.

Zero Master Digital Setup Indicator
Zero Master Digital Setup Indicator

The dial gauge indicates the distance between spindle axis and workpiece edge. As soon as the gauge shows zero, the spindle axis is exactly on the workpiece edge on the first attempt. This eliminates calculating or problems with positive or negative signs.

3D New Generation Setup Indicator
3D New Generation Setup Indicator

The 3D-Sensor NG is a further development of our worldwide accepted and proven Universal 3D-Sensor. Its distinguishing features are improved mechanics and a new and compact design.

HSK Dial Indicator Spindle Taper Gauge Manual
HSK Dial Indicator Spindle Taper Gauge Manual

Instruction manual for the dial indicator spindle taper gauge (410.310)

Vibration Meter
Vibration Meter

Measures velocity and acceleration. The large display indicates RMS, peak, min/max, hold, and low battery. Features an auto power off. Comes ready to use in a foam-lined, hardshell carrying case, with a detachable magnetic probe, 9V battery and instructions.

Tool Holder Taper Complete Measuring Units
Tool Holder Taper Complete Measuring Units

Calibrated with a gauge master, the taper gauge checks large taper diameter, small taper diameter, straightness of the taper, relationship of the flange to the taper, and taper length.

HSK Tool Holder Taper 30 Degree Clamping Angle Gauges
HSK Tool Holder Taper 30 Degree Clamping Angle Gauges

Using the calibrated master, the distance of the 30 degree clamping slope relative to l 2 is preset using the dial indicator holder. The tool taper to be measured is placed in the centering piece, allowing the variation of the taper to be measured.

Steep Taper Spindle Taper Dial Indicator Gauge
Steep Taper Spindle Taper Dial Indicator Gauge

TAC Rockford's steep taper spindle gauge is designed to verify and measure correct location of the spindle gauge line.

The gauge comes as a complete set with carrying case, dial indicator, and master taper for setting the dial indicator

Page loaded in 0.1437 seconds.