683.510.050.063

HSK-C 63 VDI to HSK-C Basic Adapter Flanges

HSK-C 63 VDI to HSK-C Basic Adapter Flanges

Zoom Enlarge Image

HSK-C 63 VDI to HSK-C Basic Adapter Flanges

Converts VDI DIN 69880-1 to HSK-C

- For fixed, centered tools - Includes clamping set - Includes brass locking ring

HSK-C 63 VDI to HSK-C Basic Adapter Flanges (Click image to enlarge)
HSK-C 63 VDI to HSK-C Basic Adapter Flanges (Click image to enlarge)

Full Data Sheet (683.510)

PDF Data Sheet: VDI to HSK-C Basic Adapter Flanges (683.510)

Product Tool Holder
Part Type Adapter Flange
Taper / Standard HSK-C
Taper Size 63
DIN 69880-1 (VDI) 50
Length (l1) 80
d2 98
l2 50
SW 5


HSK-C Taper (d1) DIN 69880-1 (VDI) Length (l1) d2 l2 SW Part Number
HSK-C 63     40    80  83  50  5  683.510.040.063
HSK-C 63    50    80  98  50  5  683.510.050.063
HSK-C 80     50    100  98  70  6  683.510.050.080
HSK-C 80     60    100  123  62  6  683.510.060.080
HSK-C 100     60    125  123  87  8  683.510.060.100

Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (HSK-C 63 VDI to HSK-C Basic Adapter Flanges) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias

Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

VDI to HSK-C Basic Adapter Flanges
VDI to HSK-C Basic Adapter Flanges

- For fixed, centered tools - Includes clamping set - Includes brass locking ring

HSK-C Locking Rings for Adapter Flanges
HSK-C Locking Rings for Adapter Flanges

Available for HSK-C 25, 32, 40, 50, 63, 80, 100

KS Adapter Flanges
KS Adapter Flanges

Used for fitting onto machine spindle or in standard SK adapters for holding HSK tools. Available for HSK-C 32, 40, 50, 63, 80, 100

VDI Lathe Turret Alignment Bars
VDI Lathe Turret Alignment Bars

Lathe turret alignment bar for VDI interface. Used for both testing concentricity of the interface as well as center alignment and adjustment on a lathe. Made to DIN 69880 standard. 465.V50.59767 is a special configuration used on certain Mazak machines. Contact us for further information. Contact us for other sizes or special requirements/configurations.

Workbench Tool Mounting Fixtures
Workbench Tool Mounting Fixtures

682.126 mounting fixtures have been discontinued. Link below for available alternatives. Mounting unit partially pre-assembled, aluminum body, holding sleeve, swivel unit and clamping elements. Available for HSK, Capto PSK (PSC), Steep Taper (SK), and VDI.

KS Adapter Flanges with Angular Alignment
KS Adapter Flanges with Angular Alignment

For fitting onto the machine spindle or on HSK or ISO adapters for holding HSK tools. Can be precisely set in radial run-out by using threaded pins (for alignment) on the machine spindle and on HSK or ISO adapters. Can be precisely set in face run-out using alignment screws (thrust pad and threaded pin) in the adapter flange. Available for HSK-C 32, 40, 50, 63, 80, 100.

ISO Taper HSK Basic Adapter Flanges for Spindles to DIN 2079
ISO Taper HSK Basic Adapter Flanges for Spindles to DIN 2079

- Includes clamping set for conventional cooling - Includes retention screws

KS Adapter Flanges for Short Spindles
KS Adapter Flanges for Short Spindles

With radial alignment. Used for fitting into short spindles (DIN 69002) for holding HSK tools. Available for HSK-C 32, 40, 50, 63.

KS Adapter Flanges with Angular Alignment
KS Adapter Flanges with Angular Alignment

Used for fitting onto machine spindle for holding HSK tools. Available for HSK-C 32, 40, 50, 63, 80, 100.

KS Adapter Flanges with Radial Alignment
KS Adapter Flanges with Radial Alignment

Used for fitting onto the machine spindle or on HSK or ISO adapters for holding HSK tools. Can be precisely set in radial run-out by using threaded-pins (for alignment) on the machine spindle and on HSK or SK adapters.

Page loaded in 0.1637 seconds.