687.5522

KS Adapter Flanges for Short Spindles

Module connection size for internal spindle contour MN5000-38

KS Adapter Flanges for Short Spindles (Click image to enlarge)
KS Adapter Flanges for Short Spindles (Click image to enlarge)

With radial alignment. Used for fitting into short spindles (DIN 69002) for holding HSK tools. Available for HSK-C 32, 40, 50, 63.

PDF Data Sheet: KS Adapter Flanges for Short Spindles (687.5522)

With radial alignment. Used for fitting into short spindles (DIN 69002) for holding HSK tools.

DesignThe adjusting screw on the machine spindle can be precisely set in radial run-out by using threaded pins (for alignment).

Supply includesClamping cartridge, stop/cover ring, and cylindrical holding screw (for holding KS adapter flange).

NoteOn request the adapter flanges can be supplied with a KS clamping cartridge for use with minimal lubrication (MQL).


Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (KS Adapter Flanges for Short Spindles) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias

Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

PSK/PSC Adaptor Flanges
PSK/PSC Adaptor Flanges

Capto (Polygonal Taper) adapter flanges are a one-piece design available for C3, C4, C5, C6, C8 PSC tapers. Ideal for tool holder blank building or other mounting capabilities with the Coromant Capto tool holder system.

KS Adapter Flanges
KS Adapter Flanges

Used for fitting onto machine spindle or in standard SK adapters for holding HSK tools. Available for HSK-C 32, 40, 50, 63, 80, 100

KS Adapter Flanges with Angular Alignment
KS Adapter Flanges with Angular Alignment

For fitting onto the machine spindle or on HSK or ISO adapters for holding HSK tools. Can be precisely set in radial run-out by using threaded pins (for alignment) on the machine spindle and on HSK or ISO adapters. Can be precisely set in face run-out using alignment screws (thrust pad and threaded pin) in the adapter flange. Available for HSK-C 32, 40, 50, 63, 80, 100.

HSK-C Locking Rings for Adapter Flanges
HSK-C Locking Rings for Adapter Flanges

Available for HSK-C 25, 32, 40, 50, 63, 80, 100

KS Adapter Flanges with Angular Alignment
KS Adapter Flanges with Angular Alignment

Used for fitting onto machine spindle for holding HSK tools. Available for HSK-C 32, 40, 50, 63, 80, 100.

KS Adapter Flanges with Radial Alignment
KS Adapter Flanges with Radial Alignment

Used for fitting onto the machine spindle or on HSK or ISO adapters for holding HSK tools. Can be precisely set in radial run-out by using threaded-pins (for alignment) on the machine spindle and on HSK or SK adapters.

ISO Taper HSK Basic Adapter Flanges for Spindles to DIN 2079
ISO Taper HSK Basic Adapter Flanges for Spindles to DIN 2079

- Includes clamping set for conventional cooling - Includes retention screws

Short HSK Spindle Adapter Flanges
Short HSK Spindle Adapter Flanges

- Includes clamping set for conventional cooling - Includes brass locking ring - Includes indexing pin and retention screws - For MQL application, order as special adaptor with MQL clamping set

Page loaded in 0.1245 seconds.