293-PSP-E

BERG Automatic Electromechanical Drawbar Style Clamping Systems

Self-traveling (Automatic) quick die clamping system with drawbar style self-locking clamping

The electro-mechanical self-locking drawbar style clamping system is designed for quick clamping dies of different widths with clamping slot on press slides. The clamping systems are controlled de-centrally and individually in each clamping system. Each local clamp control system communicates with the pressing machine control system. The clamping actuator automatically moves into the T-slot of the press slide between the parking position and the respective die. The electro-mechanical clamping system clamps the die and switches off automatically on reaching the clamping force.

PDF Data Sheet: BERG Automatic Electromechanical Drawbar Style Clamping Systems (293-PSP-E)

Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (BERG Automatic Electromechanical Drawbar Style Clamping Systems) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias

Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

Automatic Electromechanical Wedgebar Style Clamping Systems
Automatic Electromechanical Wedgebar Style Clamping Systems

Electromechanical clamp for die clamping on press slides. The clamp automatically travels between the parking position and the actual die, guided by the T-slot of the slide. In parking position, the clamp is safely locked by the wedge jaw.

Stationary Electromechanical Rotational Style Clamping Systems
Stationary Electromechanical Rotational Style Clamping Systems

Electromechanical rotational-style clamp for die clamping on slides and blank-holders. When unclamping, the draw bar rotates 90 degrees.

Stationary Electromechanical Swing-out Style Clamping Systems
Stationary Electromechanical Swing-out Style Clamping Systems

Electromechanical swing-out style clamp for die clamping on slides and blank-holders. When unclamping the draw-bar swings out up to 15 degrees maximum.

Stationary Electromechanical Moving Bolster Clamp Wedgebar Style Clamping Systems
Stationary Electromechanical Moving Bolster Clamp Wedgebar Style Clamping Systems

Electromechanical wedgebar style clamp for clamping moving bolsters. When unclamping, the clamping wedge withdraws into the clamp body.

Stationary Electromechanical Gripper Style Clamping Systems
Stationary Electromechanical Gripper Style Clamping Systems

Electromechanical gripper style clamp for die clamping on sides. When unclamping the collet opens in order to disengage the draw bolt of the die.

Automatic Electromechanical Bellcrank Lever Style Clamping Systems
Automatic Electromechanical Bellcrank Lever Style Clamping Systems

Electromechanical clamp for die clamping on press slides. The clamp automatically travels between the parking position and the actual die, guided by the T-slot of the slide. The bell-crank lever covers a wider clamping range.

Automatic Hydro-mechanical Self-locking Drawbar Style Clamping Systems
Automatic Hydro-mechanical Self-locking Drawbar Style Clamping Systems

The drawbar style hydromechanical (hydrolock) self-locking die clamping system is designed for clamping dies of various widths on press slides. The clamping actuator moves automatically in the T-slot of the press slide between the parking position and the respective die. Clamping and unclamping are performed by a hydromechanical self-locking clamping gear. Hydraulic pressure is at a maximum 90 bar.

Automatic Hydraulic Drawbar Style Clamping Systems
Automatic Hydraulic Drawbar Style Clamping Systems

The hydraulic die clamping system with drawbar style clamping is designed for clamping dies of different widths on press slides. The clamping actuator moves automatically into the T-slot of the press slide between the parking position and the respective die. The clamping element can clamp different clamping rim heights due to the long clamping stroke of the double acting cylinder. Hydraulic pressure is at a maximum 400 bar.

Stationary Electromechanical Pull-back Rotational Style Clamping Systems
Stationary Electromechanical Pull-back Rotational Style Clamping Systems

Electromechanical pull-back rotational clamp for die clamping on slides and for clamping of moving bolsters. When unclamping the draw bar rotates 90 degrees and withdraws by 120 mm max.

Page loaded in 0.1467 seconds.