Sorry, the page you are looking for doesn't exist.

If you are looking for an item or need support, please call us at 1-815-962-5600 or send us an email.

Return to TACRockford Home

Was any of this what you were looking for?

KS Clamping Cartridges (Standard)
KS Clamping Cartridges (Standard)

Available HSK-C 32, 40, 50, 63, 80, 100

Details PDF (687.KS)

TRIBOS SVP-2 Manual Pump Clamping Device
TRIBOS SVP-2 Manual Pump Clamping Device

Design with manual pump for quick actuation and frequent tool changes.

Details PDF (541.001)

Custom-Built Machine Gauges
Custom-Built Machine Gauges

We can build custom gauges for any machine or machine designed specifically for any application and requirements -- even gauges not designed or built by anyone else! Interface options include multi-language support, multiple measuring capabilities, and any communication method.

Details PDF (461.916)

TRIBOS SVP-2 Assembly and Operating Manual
TRIBOS SVP-2 Assembly and Operating Manual

Design with manual pump for quick actuation and frequent tool changes.

Details PDF (541.001M)

HSK-KM Tool Changer Alignment Gauge Instruction Manual
HSK-KM Tool Changer Alignment Gauge Instruction Manual

The tool changer alignment gauge is designed to verify correct alignment of the machine spindle to the Automatic Tool Changer (ATC). See PDF for full instruction manual.

Details PDF (440.100M)

MQL HSK-A Hydraulic Chucks for Manual Tool Change
MQL HSK-A Hydraulic Chucks for Manual Tool Change

Clamping diameter for shaft tolerance h6. Available for HSK-A 50, 63, 100.

Details PDF (683.209)

Steep Taper Tool Changer Alignment Gauge Instruction Manual
Steep Taper Tool Changer Alignment Gauge Instruction Manual

The tool changer alignment gauge is designed to verify correct alignment of the machine spindle to the tool changer. See PDF for full instruction manual.

Details PDF (440.800M)

Wireless Chuck Force Sensor Manual
Wireless Chuck Force Sensor Manual

The ForceCheck chuck force gauge is designed to measure the clamping forces created by a chuck. The wireless sensor can be used for either static (non-rotating) or dynamic (rotating) measurements. When rotating, the sensor can also measure RPM (Revolutions Per Minute).

Details

Heavy-Duty Tool Changer Grippers
Heavy-Duty Tool Changer Grippers

Heavy duty grippers are designed for demanding applications and where total cost of machine ownership is considered (individual components are replaceable). These grippers have a pivoting finger that allows tool holding force to be adjusted by changing the internal spring. In addition, this unique design minimizes wear on the tool holder.

Details PDF (250.111)

Wireless Gauge Display Manual
Wireless Gauge Display Manual

The ForceCheck Wireless Display is designed for use in conjunction with ForceCheck wireless sensors. The display shows the force, RPM, or other output transmitted by a connected sensor.

Details

SKVZ Tool Clamping Cylinders
SKVZ Tool Clamping Cylinders

SKVZ locking heads are designed for limiting the springing out resilience of the tools to the elastic yield of the connection elements when the axially acting cutting force components are larger than the clamping force on spring actuated tool clamping and chucking systems.

Details PDF (291-SKVZ)

Rear-Clamp Manual Clamping Cartridges
Rear-Clamp Manual Clamping Cartridges

355.621 series manual clamping cartridges are suitable for HSK-E and HSK-F holders that do not have drive key slots or an access hole on the side of the taper. In addition, the center bolt is compatible with standard HSK coolant tubes.

Details PDF (355.621)

Capto Tool Changer Alignment Instruction Manual
Capto Tool Changer Alignment Instruction Manual

The tool changer alignment tool is to verify proper alignment between the automatic tool changer (ATC) and the spindle or clamping unit. See PDF for full instruction manual.

Details PDF (440.C00M)

Page loaded in 0.0806 seconds.