410.310.150.000

Dial Indicator Spindle Taper Gauges - HSK-A/C/E 50 + HSKB/D/F 63

HSK Spindle Taper Gauge

Zoom Enlarge Image

HSK Spindle Taper Gauge

For the periodic verification of the taper of HSK spindles per DIN 69063

To ensure sustained accuracy at HSK interfaces, we recommend comparison measuring of the geometry of HSK tool shanks and spindles at regular intervals. These checks should become more frequent with an increased change rate at the interface. Calibration on request.

HSK Spindle Taper Gauge (Click image to enlarge)
HSK Spindle Taper Gauge (Click image to enlarge)
Dial Indicator Spindle Taper Gauges - HSK-A/C/E 50 + HSKB/D/F 63 (Click image to enlarge)

Full Data Sheet (410.310)

PDF Data Sheet: Dial Indicator Spindle Taper Gauges (410.310)


HSK d2 l 2 Part Number
HSK-A/C/E 32 + HSKB/D/F 40     24  3.2          410.310.132.000
HSK-A/C/E 40 + HSKB/D/F 50     30  4          410.310.140.000
HSK-A/C/E 50 + HSKB/D/F 63    38  5          410.310.150.000
HSK-A/C/E 63 + HSKB/D/F 80     48  6.3          410.310.163.000
HSK-A/C/E 80 + HSKB/D/F 100     60  8          410.310.180.000
HSK-A/C 100 + HSKB/D/F 125     75  10          410.310.190.000
HSK-A 125     95  12.5          410.310.192.000
HSK-A 160     120  16          410.310.196.000

Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (Dial Indicator Spindle Taper Gauges - HSK-A/C/E 50 + HSKB/D/F 63) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias

Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

HSK Dial Indicator Spindle Taper Gauge Manual
HSK Dial Indicator Spindle Taper Gauge Manual

Instruction manual for the dial indicator spindle taper gauge (410.310)

Series 410 Dial Indicator Tool Taper Gauges
Series 410 Dial Indicator Tool Taper Gauges

Both measuring gauges are set to zero with the calibrated taper plug gauge. When an HSK tool holder is inserted in the ring gauges, deviations in diameters d2 or d3 are shown on the indicator.

Dial Indicator Spindle Taper Gauges
Dial Indicator Spindle Taper Gauges

To ensure sustained accuracy at HSK interfaces, we recommend comparison measuring of the geometry of HSK tool shanks and spindles at regular intervals. These checks should become more frequent with an increased change rate at the interface. Calibration on request.

Pneumatic Spindle Taper Gauges
Pneumatic Spindle Taper Gauges

Non-contact measuring with nozzles results in high accuracy and consistency of measuring results. The measuring range can be increased with the built-in dial indicator. This enables the gauge to be used during pre-machining of the taper. Measuring set with case includes nozzle plug gauge with dial indicator and 2 setting rings.

HSK Tool Holder Taper 30 Degree Clamping Angle Gauges
HSK Tool Holder Taper 30 Degree Clamping Angle Gauges

Using the calibrated master, the distance of the 30 degree clamping slope relative to l 2 is preset using the dial indicator holder. The tool taper to be measured is placed in the centering piece, allowing the variation of the taper to be measured.

Tool Holder Drive Key Tool Taper Gauges
Tool Holder Drive Key Tool Taper Gauges

Available for HSK 32, 40, 50, 63, 80, 100, 125, 160

Drive Key Spindle Gauges
Drive Key Spindle Gauges

When inserted in the spindle, the "go" gauge should be in contact with the plane face. The "no go" gauge should not contact the face. Two measuring gauges in storage case: "go" and "no go" plug gauges.

Centro Setup Indicator
Centro Setup Indicator

With the CENTRO, bores and shafts can be easily and precisely centered. The CENTRO is clamped into a tool holder and inserted into the spindle of the milling machine. The machine spindle is then positioned near the bore or shaft that is to be measured, and rotates at low speed.

Spindle Runout Test Arbor Instructions
Spindle Runout Test Arbor Instructions

One of the leading causes of tool breakage, part finish issues, tolerance control, and machine registration issues is excessive spindle runout.

Page loaded in 0.1504 seconds.