451.CG0.800.160

Granite Inspection Cylinders - 800 x 160

Granite Inspection Cylinder

Cylinder	H (mm)	D (mm)	Part Number
200 x 70	200	70	451.CG0.200.070
300 x 80	300	80	451.CG0.300.080
400 x 100	400	100	451.CG0.400.100
500 x 120	500	120	451.CG0.500.120
800 x 160	800	160	451.CG0.800.160

For more information regarding this item (Granite Inspection Cylinders - 800 x 160) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment		Alias
Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:

Questions or comments:

How did you hear about us?
Other:

Your preferred method of contact

Granite Inspection Cylinders

Granite Squares

Granite Squares 4-Sided

Tool Dynamic TD 800 Special Tool Balancing Systems

Based on the proven foundation provides the tool Dynamic Balancing Tool Dynamic TD 800, the balancing of large rotors of all types includes bearing rings, grinding wheels and turbine wheels. With tailor-made clamping adapters, balancing their rotors used quickly and easily.

Master Granite Setup Squares (90 degrees)

Granite block with two diamond-lapped measuring faces. Made in Germany to DIN 875 / 876 standard.

Tool Holder Taper Inspection Gauge

Available for all steep taper tool holder sizes (20, 30, 35, 40, 45, 50, 55, 60) The tool holder inspection gauge is designed to inspect tool holder taper diameters for wear and other potential problems. Verifying tool holder tapers are correct can help to maximize spindle life and improve part finish. Please note that the taper inspection gauge will only check diameter on two planes along with taper angle. The gauge will not detect nicks or localized damage to the taper. We recommend using series 430.110 taper sleeve gauges in conjunction with the taper inspection gauge for this purpose. The tool holder taper inspection gauge includes the Fixture Base and two Indicators (0.002mm or 0.0001 inch resolution). An optional 430.110 certified Taper Master is strongly recommended for zeroing the Indicators. If a master is not available, a knowngood tool holder can be used in place of the master.