495.200.125.004

ForceCheck Wired Chuck Force Sensor, Measuring Diameter 125 mm

ForceCheck Wired Chuck Force Sensor, Measuring Diameter 125 mm

Zoom Enlarge Image

ForceCheck Wired Chuck Force Sensor, Measuring Diameter 125 mm

Measures the holding force on turning-centers, chucks, or lathes

Designed to quickly check the holding force on a chuck or turning-center. The wired chuck force gauge can be customized for any diameter.

ForceCheck Wired Chuck Force Sensor, Measuring Diameter 125 mm (Click image to enlarge)
ForceCheck Wired Chuck Force Sensor, Measuring Diameter 125 mm (Click image to enlarge)

Measuring Diameter Jaws Diameter Force Range (per Jaw) Part Number
D28   2 / 3  28 mm / 1.10 in.  0...15kN / 3,400 lb-F          495.200.028.003
D28 (Low Force)   2 / 3  28 mm / 1.10 in.  Contact us          495.200.028.003.LF
D72   2 / 3  72 mm / 2.83 in.  0...50kN / 11,200 lb-F          495.200.072.003
D72 (Low Force)   2 / 3  72 mm / 2.83 in.  Contact us          495.200.072.003.LF
D125   2 / 3 / 4  125 mm / 4.92 in.  0...65kN / 14,600 lb-F          495.200.125.004
D125 (Low Force)   2 / 3 / 4  125 mm / 4.92 in.  Contact us          495.200.125.004.LF
D200   2 / 3 / 4 / 6  200 mm / 7.87 in.  0...100kN / 22,500 lb-F          495.200.200.006
D200 (Low Force)   2 / 3 / 4 / 6  200 mm / 7.87 in.  Contact us          495.200.200.006.LF

ForceCheck Force Gauge Base Set - Wired
ForceCheck Force Gauge Base Set - Wired

Sets include display, connecting cable, and carrying case. Measuring bars, adapters, and other accessories are ordered separately.

Details PDF (461.310)

Part Number
ForceCheck Base Set                 461.310.000.000

Chuck Force Sensor Extensions and Accessories
Chuck Force Sensor Extensions and Accessories

Accessories for the chuck force include a variety of types of rest pads and extensions to match the gripping jaws on a turning-center/chuck.

Details PDF (495.800)


Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (ForceCheck Wired Chuck Force Sensor, Measuring Diameter 125 mm) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias

Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

Chuck Force Gauges - Wired
Chuck Force Gauges - Wired

Designed to quickly check the holding force on a chuck or turning-center. The wired chuck force gauge can be customized for any diameter.

Large Diameter VTL Chuck Force Gauges
Large Diameter VTL Chuck Force Gauges

Measure clamping force on 12+ inch diameter chucks. Available as wired or wireless sensor unit. Base set is separate which includes wired or wireless read-out display, custom case, and accessories for the sensor.

Chuck Force Sensor Extensions and Accessories
Chuck Force Sensor Extensions and Accessories

Accessories for the chuck force include a variety of types of rest pads and extensions to match the gripping jaws on a turning-center/chuck.

Wireless Chuck Force Sensor Sets
Wireless Chuck Force Sensor Sets

Suitable for measuring RPM and force at the same time. These are complete sets that include sensor, standard rest pads, RPM magnetic wand, display, and padded carrying case. Contact us for custom sizes and multi-adapter sets.

Wireless Chuck Force Sensor Manual
Wireless Chuck Force Sensor Manual

The ForceCheck chuck force gauge is designed to measure the clamping forces created by a chuck. The wireless sensor can be used for either static (non-rotating) or dynamic (rotating) measurements. When rotating, the sensor can also measure RPM (Revolutions Per Minute).

HSK Taper Wired Force Measuring Bars
HSK Taper Wired Force Measuring Bars

Wired Forcecheck sensors also require a wired display unit and connecting cable to fully function.

Wireless Chuck Force Gauges
Wireless Chuck Force Gauges

The ForceCheck wireless chuck force gauge is designed to quickly and accurately measure holding force and speed on chucks. Verifying chuck holding force allows manufacturers to improve the repeatability of a manufacturing process by checking actual holding force under dynamic (rotating) conditions, as well as perform critical preventative maintenance checks. Contact us for other clamping diameters and extension rings, as well as 4+ jaw chucks.

Senso 3000 Hydraulic Tool Holder Force Gauge
Senso 3000 Hydraulic Tool Holder Force Gauge

The SENSO 3000 is a specialized tool for verifying correct operation of hydraulic tool holders. For workholding collet force gauges, please see our ForceCheck collet force gauges. SENSO 3000 determines the clamping force of the hydraulic chuck via a pressure sensitive plug gauge. The entire length of the plug gauge is clamped in the hydraulic chuck so that when tightening the clamping screw the clamping pressure of the chuck is optimally applied. The clamping force measuring instrument displays the clamping force as an absolute measurement value on the one hand and as a percentage clamping force in relation to a reference value that can be set individually on the other. This way, SENSO 3000 can be adapted to customer specific application conditions and requirements. The clamping force measuring instrument is supplied with a plug gauge for the respective clamping diameter as well as a carbide proofing bar for calibration purposes and a CR 2430 type battery – all in a sturdy and handy case.

HSK Wired ForceCheck Sensors
HSK Wired ForceCheck Sensors

Wired Forcecheck sensors also require a wired display unit and connecting cable to fully function.

Page loaded in 0.1941 seconds.