685.AXS

HSK Manual Clamping Grippers with Axial Drive

HSK Manual Clamping Grippers with Axial Drive (Click image to enlarge)
HSK Manual Clamping Grippers with Axial Drive (Click image to enlarge)
HSK Manual Clamping Grippers with Axial Drive (Click image to enlarge)

The Axialspanner comes for clamping disc-shaped tools (grinding wheels, saw blades) on HSK-flanges used. With low tension moments high clamping forces are generated, which are more than 50% above the recommended for HSK shanks values. Depending on the application of the AXS is centrally operated from the front through a tool flange or from the rear through the spindle.

PDF Data Sheet: HSK Manual Clamping Grippers with Axial Drive (685.AXS)

HSK-A HSK-B Key Size Torque Force Part Number
HSK-A/C/E 32     HSK-B/D/F 40    3    6 Nm  12 kN  685.AXS.032.B00
HSK-A/C/E 40     HSK-B/D/F 50    4    11 Nm  16 kN  685.AXS.040.B00
HSK-A/C/E 50     HSK-B/D/F 63    5    18 Nm  24 kN  685.AXS.050.B00
HSK-A/C/E 63     HSK-B/D/F 80    6    24 Nm  30 kN  685.AXS.063.B00
HSK-A/C/E 80     HSK-B/D/F 100    -    -  -  685.AXS.080.B00
HSK-A/C/E 100     HSK-B/D/F 125    -    -  -  685.AXS.100.B00

Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (HSK Manual Clamping Grippers with Axial Drive) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias

Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

HSK Axial-Clamping Manual Clamping Grippers
HSK Axial-Clamping Manual Clamping Grippers

The Axial pliers Spanner is a manual HSK-tensioners with axially in the center lying indirect drive, which is accessible both from the front and from behind. It is particularly suitable for clamping of HSK, especially grinding wheel shots, with the AZS can be integrated into the hub of a wheel on the one hand, (HSK arranged vice versa - the spindle is the father) on the other hand, as usual, can be incorporated into the spindle using flange.

Rear-Clamp Manual Clamping Cartridges
Rear-Clamp Manual Clamping Cartridges

355.621 series manual clamping cartridges are suitable for HSK-E and HSK-F holders that do not have drive key slots or an access hole on the side of the taper. In addition, the center bolt is compatible with standard HSK coolant tubes.

Steep Taper Grippers SSKE-KH
Steep Taper Grippers SSKE-KH

SSKE-KH grippers are designed for applications requiring a shorter drawbar stroke.

HSK Grippers HSS and HSSL
HSK Grippers HSS and HSSL

The BERG Spanntechnik HSS gripper has been replaced by the HK and HKR. Replacement grippers are available for existing machines.

Capto Clamping Systems
Capto Clamping Systems

BERG Spanntechnik is a leading supplier of Capto grippers and clamping systems.

Mounting Nuts for HSK-A/C Interface Adaption
Mounting Nuts for HSK-A/C Interface Adaption

Can be mounted in front of the spindle shaft after the installation of the collet. Has the advantage of being adaptable to HSK-E or HSK-F tool interfaces in an HSK-A spindle. Just use the drive key to expand and then clamp the desired tool. The ENS slot nuts can also be used in manual clamping units for more flexibility. Available for HSK 32, 40, 50, 63, 80, and 100.

Steep Taper Grippers SSKF
Steep Taper Grippers SSKF

With an easy-to-machine spindle contour, BERG Spanntechnik SSKF gripper is designed for cost-sensitive applications.

Page loaded in 0.1075 seconds.